1, electric shock prevention: The new national standard combined hole design, electric shock prevention shell structure design, socket safety design, safety insertion distance enhancement design and other multiple safety designs can effectively prevent electric shock accidents.
2, plug resistance: high-quality copper with patented sleeve design, strong elasticity, proper bite, not loose after 5000 plugs, which can effectively prevent arc discharge.
3. Fire-proof: interior materials is made of all flame-retardant engineering materials, which will not burn at 750 degrees, effectively preventing fire and eliminating potential safety hazards.
4. Safety design: Bull socket adopts 27 all-round safety designs to ensure the safety of the socket from the design source. Whether it is plug, power cord, shell, switch or internal copper sheet, Bull has carefully designed every detail of the socket, striving to eliminate potential safety hazards from the source.
Extended data:
Matters needing attention in the use of Ubik track socket:
1, the installation height of the pan-track socket, when specified in the design, shall be installed according to the design requirements; When the design is not clear, it should generally meet the following requirements: the socket with safety door is not less than 0.3M；; The outlet without safety door shall not be less than1.8m. It is recommended to buy the outlet with safety door as much as possible, because the price difference between them is not big.
2. Bathrooms or other damp places should use well-sealed waterproof and splash-proof sockets. (Note: The socket with safety door is based on the general socket, and a plastic baffle is added in front of the metal reed of the jack. Three hole socket, when inserting the plug, the grounding pile head is inserted into the hole first, and the mechanism in the socket opens the other two hole doors. The two-hole socket must be inserted into the socket pile head at the same time before the safety door can be opened, so as to prevent children from inserting metal objects by mistake and causing safety accidents. )
3. When installing Ubiquid track socket, its panel should be straight and close to the wall. Moreover, the wiring should conform to: single-phase two-hole socket, which is opposite to the right hole or upper hole of the socket, and the left hole or lower hole is connected to the zero line; Single-phase three hole socket is connected to the right hole of the socket, the left hole is connected to the zero line, and the upper hole is connected to the ground wire.