Experimental study on cotton transplanter
Engine compartment fire extinguisher holes and doors
Engine fairing fire extinguisher hole and cover
Aircraft; Engine compartment fire extinguisher holes and doors
Aerospace; Fire extinguisher holes and doors in the engine compartment.
Specification for fire extinguisher doors in aircraft engine rooms
Specification for fire extinguisher filler in aero-engine cabin
Please wipe off the excess oil on the engine nacelle and landing gear.
Wipe off the excess oil on the engine nacelle and landing gear.
Smoke from engine room No.4, suspected fire.
No.4 engine fairing is smoking and may catch fire.
Smoke from engine room No.4, suspected fire.
No.4 engine fairing is smoking and may catch fire.
Different nacelles, with deep cross-section, with air inlet above the transmission shaft.
The engine compartment and the air inlet on the transmission shaft are somewhat different.
The success of nacelle flight test verifies the high accuracy and repeatability of the system.
The effectiveness and practicability of the system have been verified in actual operation.
Rule 2: The warp nacelle must have at least 50% line of sight through the hull.
Rule 2: Warp drive must satisfy 50% of the hull (? )
It is difficult to make sentences with a nacelle.
In this paper, DC torque motor in reaction flywheel control mode is used for pod azimuth control.
The azimuth control of balloon basket is realized by DC torque motor under the control mode of reaction flywheel.
O astazou turboprop engine is installed in the slender cabin at the leading edge of the wing to drive the three-blade propeller.
Two engines are installed in the small engine compartment on the wing, each driving a three-blade propeller.
The engine and fan are completely enclosed in each engine room, which greatly reduces the injury to soldiers near the vehicle in case of engine fire or explosion.
Each engine compartment completely seals the engine and fan, which can greatly reduce the possibility of injuries to soldiers near the aircraft in the event of engine fire or explosion.
Taizhou Jiangyan High Power Power Transmission Engineering Equipment Co., Ltd. is an enterprise specializing in the production of advanced hanging baskets, winches, marine winches and pile drivers.
Taizhou Jiangyan Juneng Lifting Machinery Co., Ltd. is an enterprise specializing in the production of series products of hanging baskets, winches, marine anchors and pile drivers with advanced domestic level.
The model of blade, tower, nacelle and hub of 750kw wind turbine is established, the basic method of load calculation is formulated, and static and dynamic simulation calculation is carried out.
The modeling and simulation of wind turbine are all done under the software platform of bladedforwindows. In this paper, the blade, tower, nacelle and hub of wind turbine are modeled, the basic method of load calculation is determined, and static and dynamic simulation calculations are carried out.
In this paper, a mathematical model reflecting the unsteady and non-planar aerodynamic characteristics of tilting rotor in longitudinal channel is proposed. In the whole flight envelope, the rotor thrust continues to tilt, and the aerodynamic force of each component changes as a function of airspeed and nacelle angle.
In the whole flight envelope, the thrust vector direction of the rotor is constantly changing, and the aerodynamic force of each part of the aircraft changes with the change of engine nacelle inclination angle and airspeed, so the flight dynamics of the aircraft has strong unsteady and nonlinear characteristics.