First, break through the advantages of sockets.
1, stylish design
The design of large panel and extremely narrow frame is adopted, and the key area on the panel accounts for more than 80% of the total area, which is more convenient for the use of the plug. In addition, the breakthrough socket also adopts an integrated patented structure, which is handled very well and brings a brand-new visual experience to the room.
2, good corrosion resistance
The socket metal wire drawing repeatedly scratches the aluminum plate and adopts a special film pasting process. Forming a thin film layer containing metal components on the metal surface not only has good decorative effect, but also has anti-corrosion effect.
3, long service life
Experiments show that the service life of the breakthrough socket is longer. Can be used for a long time.
Second, how to break through the socket?
1. The metal of the socket is not only anodized, but also forms an oxide film on the metal surface through electrolysis, which makes the socket surface have better heat resistance and longer service life.
2. Single-control single-open switch connection mode
Single-control single-open switch socket has simple structure and can be directly connected during decoration. Just connect the L terminal on the back of the socket with the red wire and then connect it to the L 1 terminal with the blue wire, and complete the connection of the single-control single-open switch.
3. Single-opening five-hole socket connection mode
Switch socket installation
When we install switch sockets, it is best to choose them after carpenters and painters have finished. This only needs to remove the dust from the switch socket and then connect it to make the circuit work normally.
Power line processing
Leave a short section of wire in the switch socket box for future maintenance, then cut the wire core, be careful not to damage the wire core, then connect the wire to the corresponding terminal clockwise, and then tighten the head, be careful not to expose the wire core.
Line connection
When wiring, connect the red live wire and blue zero wire to the L and N terminals respectively, connect the yellow-green double-color wire to the socket terminal N, then connect the socket terminal L with the disconnect switch terminal, and then connect the other wire on the bulb to the switch post L..
Switch socket fixing
During operation, the wires left at the bottom of the box are first taken out of the plastic outlet holes, then the plastic table is attached to the wall, and finally fixed on the bottom box with screws. After finalization, the switch jack in each position will be fixed.
Switch socket panel fixing
Finally, just lean the switch socket against the plastic table, put it in the direction, and then fix it with screws. Cover plate socket completed.
4. Single-hole three hole socket connection.
The single-hole three hole socket connection is similar to the single-hole five-hole connection, but there are some differences. Their difference mainly lies in the single-port and five-hole internal connection between the two live wire terminals and the zero wire terminal of the socket. In addition, if the cable is not very high and there is no yellow-green protection line when connecting the building, then we can't connect the terminal.
Socket is essential for a family. Not only beautiful, but also pay attention to safety. I hope Bian Xiao's suggestion can help families who decorate sockets.