Difference: Carbon fiber will not cause indoor heat, odor, skin dehydration, dry mouth, indoor dust, or dirty air convection. Carbon fiber has higher thermal performance and is more stable. The electric heating body is a completely black body material. The electric heating energy conversion rate can reach more than 99%. During the electric heating process, the tensile strength does not change greatly. After technological treatment in the early stage, it will not oxidize under high temperature, and the current load per unit area will not occur. It does not take up any usable area and provides invisible enjoyment. Keyuan carbon fiber electric heating panels can be flexibly laid on the ground, walls and ceilings with different powers according to needs. They do not occupy any indoor plane space, allowing indoor spaces to be arranged and placed more flexibly. furniture. Advantages of increasing the use area 5. Low cost operation, high-quality enjoyment of infrared radiation heating, high carbon fiber heat conversion rate, polystyrene insulation layer and many other advantages reduce heating operating costs. Carbon fiber floor heating can be used when the room temperature is designed to 16°C. It can achieve the heating effect of ordinary water heating at 20℃, and the electric heat conversion rate is 99%. With far-infrared radiation heating, the temperature of the surrounding objects in the room is higher than the air temperature. When the heating system is turned off for a short period of time, the heat emitted by the surrounding objects in the room will play a role in keeping the room temperature stable. The carbon fiber electric heating plate is a carbon fiber surface heating material with high-tech carbon fiber material as the heating element. It overcomes the problems of long-term use of other heating materials in the past, such as overcurrent between electrodes, easy breakage, peroxidation of the heating element, easy falling off, low insulation strength, and heat resistance. Poor shortcomings.
According to requirements, the power, resistance and surface temperature of the conductive paper heating element can be designed and adjusted at will. It heats evenly and has high electric heat conversion efficiency, reaching more than 99%. It heats up quickly. It heats up in one minute after powering on and reaches the set temperature in five minutes. Compared with any heating medium on the market, the energy saving is about 50-70% with the same effect.
Carbon fiber electric heating plate: It is a non-metallic carbon fiber heating material, which is compounded with high-strength insulating material through high temperature and high pressure to form a heating device.
Parameters:
Surface temperature: ≤120°C
Power: 0.01w/C㎡—0.4w/C㎡
Withstand voltage: ≥3750V
Thickness: 0.3mm-1mm
Specifications: 980mm×1980mm range available
Waterproof level: IP6 or above
p>
Flame retardant level: UL94V0 level
Service life: more than 30,000 hours
Features:
1. High efficiency and energy saving
The carbon fiber electric heating plate is made of non-metallic carbonaceous materials. When it is energized and heated, it directly converts electrical energy into thermal energy. It does not produce light energy or mechanical energy and has no own heat loss. It has been tested by the National Infrared and Industrial Electric Heating Product Quality Supervision and Inspection Center and proved: electrothermal conversion The efficiency is as high as 99% or more. Its biggest feature is that it transmits the best radiant heat. The electric-thermal radiation conversion efficiency exceeds 60%. It also generates surface heat. The heating speed is fast and uniform. The surface temperature is 1 minute after power is turned on. It can reach the design temperature; compared with traditional conduction heat and convection heat, this product saves more than 30% energy. [1]
Energy-saving principle
① Planar heating
The electric heating plate is a planar heat dissipation, and its conductive heating element is like a three-dimensional network, with local disorder and overall A planar resistor formed by ordered short carbon fibers. The planar resistor is both a heating surface and a heat dissipation surface. The heat transfer area is 99% larger than that of resistance wire, and the heat dissipation area is more than 50 times that of resistance wire.
② Electron impact heating
The heating element produces a thermal reaction under electrically induced excitation conditions. The electrons move at high speed in the heating element and generate heat on the irregular conductor-shaped electric heating plate. Brownian motion, the collision and friction between electrons generate heat, which penetrates the medium; the entire heating process is silent, lightless, and pollution-free, making it a truly green product.
2. Safe, reliable and long service life
The heating element is a new non-metallic carbon fiber heating material, which is compounded with high-strength insulating material through high-temperature and high-pressure sealing. It will not oxidize, fall off or break under long-term operation; it is flame retardant, corrosion-resistant, waterproof and moisture-proof; it has excellent shock-proof performance, impact resistance and good mechanical properties; the insulation strength reaches 1000V, and the long-term use can reach 30,000 hours above.
3. Green and environmentally friendly
The electric heating plate is a non-metallic pure resistance heating element. It has no noise, no magnetic pollution, no static electricity, and no open flame during operation. Has passed environmental certification.
4. Physiotherapy is environmentally friendly
The infrared wavelength of the electric heating plate is between 5 and 15 m, which is the most suitable infrared band for the human body, so it is praised by the medical community as the "Light of Life" , it can activate human cells and tissues to form vibration absorption, promote body metabolism, and has obvious physical therapy effects.
5. Space saving
The thickness of the product is between 0.3~0.5mm, and the specifications and shapes can be designed at will according to the use requirements. Its biggest feature is that it does not take up space when installed.
Scope of application:
Room heating: residences, villas, office buildings, hotel apartments;
Large venues: libraries, exhibition rooms, conference halls, theaters, Kindergartens, entertainment venues, shopping malls, banks, hospitals;
Special heating: swimming pools, sports venues, greenhouses, parking lots, waiting rooms, roads, bridges and tunnels, factories and warehouses, airports, ground skiing, etc.
Infrared rays are the rays that can penetrate most deeply into the skin and subcutaneous tissue among all sunlight. Since far-infrared rays are close to the vibration frequency of cell molecules in the human body, when the "life light source" penetrates into the body, it will cause The vibration of atoms and molecules in human cells absorbs the thermal reaction caused by friction between molecules through vibration, causing the body temperature to rise, dilating capillaries, accelerating blood circulation, and helping to remove blood vessel accumulation and harmful substances in the body. Substances remove obstacles that hinder new metabolism, revitalize tissues, promote enzyme production, and achieve the purpose of activating tissue cells, preventing aging, and strengthening the immune system. Therefore, far-infrared rays can improve and prevent various diseases caused by blood circulation and microcirculation disorders.
The traditional method is to rely on the high temperature environment to cause the body temperature to increase and cause sweating. This traditional sauna equipment can easily cause suffocation, lack of air circulation, easily hurt the skin, is not easy to last for a long time, and is not suitable for the elderly. people or children. And now the latest patented technology helps us solve this situation! As we all know, our edible oven uses the principle of infrared rays.
Far infrared ray has solved the above problems!
During low-temperature sweating, natural sweating prompts many healthy processes to be triggered, and some harmful substances in the human body, such as heavy metals, nicotine, alcohol and other harmful substances in food, lactic acid, free fatty acids, fat Subcutaneous fat, sodium ions, uric acid, cosmetic residues accumulated in the pores, etc. can be excreted directly from the skin and sweat without going through the kidneys through metabolism, thus avoiding increased burden on the kidneys.
The far-red wire is also different from the low-frequency electromagnetic waves emitted by household appliances. The low-frequency electromagnetic waves emitted by household appliances can penetrate walls and change the characteristics of human body current, and are highly suspected by people. Hazardous. The penetration power of far-infrared rays on human skin is only 0.01 to 0.1 centimeters. The human body itself also emits far-infrared rays with a wavelength of red 9 microns, so it should not be confused with low-frequency electromagnetic waves. Far infrared rays are used in the auxiliary treatment of many diseases, such as muscle soreness, tendinitis, sores, burns, and other diseases that are difficult to heal. Far infrared rays can be used to promote blood circulation to achieve the purpose of auxiliary treatment.