Solution of fc elimination step of kelon air conditioning

When "FC" flashes on the display screen of Kelon air conditioner indoor unit, it means that the machine is executing "filter screen cleaning prompt function", prompting that the filter screen needs to be cleaned. Some products display "FC" and beep at the same time. The above phenomenon should be explained to users. It's not the machine. FC is not a machine fault code, but a normal function of the air conditioner, indicating that the filter screen needs cleaning. 1.FC indicates that the air conditioner should clean the filter, which is a humanized prompt function. This is a code name of Kelon air conditioner; The fan in the air conditioning room runs for 200 hours, and enters the state of filter screen cleaning prompt, and FC prompt is displayed. 2. It is very important to keep the filter clean all the time. Without the prompt function, people will continue to use it in a harmful state. After cleaning the filter, just press the reset switch (emergency). If you don't understand, please refer to the air conditioning manual. 3. Press the key on the remote control (press and hold the high-efficiency key for 5 seconds, and the remote control will send out a cleaning reset code) to clean and reset the filter. (This plan is a master plan) 4. Operate the "emergency button" on the indoor controller to clean and reset the filter screen; In the state of cleaning prompt, press "panic button" once to reset and cancel the cleaning prompt, and panic button will resume its function. 5. After exiting the cleaning prompt state, the air conditioner will return to its normal appearance and running state, and the accumulated timer of the fan will be reset. FC appears, which is Kelon's patented technology-the appearance of filter dust, prompting the request to clean the filter. After cleaning, the word FC is gone! If you don't clean it up in time, the word FC will appear every time you turn it on!