Active evaluation of titanium-induced PC 005 installed by first-line brand SSD.

Zhiti is a consumer-grade SSD brand owned by Changjiang Storage, an emerging storage manufacturer. Supported by Changjiang storage technology and experience, intelligent SSD has obvious advantages in hardware design and performance.

The front of this titanium-induced PC005 active solid-state drive is a common parameter sticker, and there are no metal heat sinks and graphene heat sinks. Users need to prepare their own external heat sinks.

Titanium PC005 active solid-state drive adopts flash particles of Xtacking architecture of Changjiang Storage. Xtacking architecture is essentially an innovative upgrade of the 3D NAND storage structure of Changjiang Storage. It processes the circuits conforming to I/O transmission and storage units on two independent wafers respectively, and then combines the wafers into one by Xtacking process, so that n and can obtain higher I/O transmission speed, higher density and smaller chip area, thus further improving product productivity while maintaining product performance and reliability.

The main control of titanium PC005 active SSD is Ronghui SM2262EN, which is the second generation PCIe SSD series main control chip launched by Rong Hui Science and Technology on June 201August. It supports PCIe G3 4 channel, brand-new NVMe 1.3 specification and 8 n and channel designs. It has the characteristics of high efficiency and low power consumption. The maximum sequential reading speed is 3.5GB/s and the sequential writing speed is 3.0 GB.

External South Asia 5 12MB Cache of Titanium PC005 Active Solid State Disk.

Titanium PC005 active solid state drive is designed according to the standard M.2280 specification, and supports PCIe3.0*4 and NVMe 1.3 protocols. There are three specifications for users to choose from: 256G, 5 12G,1t. The continuous reading speed of these three specifications has reached 3500MB/s of PCIe3.0 ceiling, which is higher than that of some solid state drives of the same specification.

Titanium PC005 active solid-state drives all provide five-year warranty service, and the difference lies in the continuous writing speed and TBW. The maximum continuous writing speed of 5 12G is 2500MB/s, and the maximum writing capacity is 320TBW. Titanium PC005 active solid-state hard disk does not provide specially designed metal heat sink with the package, and users need to prepare it themselves or use it with the heat sink of the motherboard.

Let's install the test directly. The motherboard of Titanium PC005 active SSD is ROG Strix X570-F Gaming, which supports PCIe 4.0. Titanium PC005 active solid-state hard disk is directly installed in the first slot and installed together with the metal heat sink of the motherboard.

After the default installation, the titanium PC005 active SSD needs to be manually formatted. Here, the disk partition is set to GPT(GUID partition table), and the actually displayed free space is 476.94GB.

I'll test it with some software.

Under the file benchmark test of HD Tune Pro, the file length is directly set to 200G here. For the test results of HD Tune Pro, it is always measured three times, and a set of test data with the highest average rate is taken. The sequential reading and writing performance of PC005 Active induced by Ti is 2700798 KB/s(2637.5MB/s) and 570 158KB/s(556.79 MB/s), respectively.

Under the wafer standard, 4G is selected as the parameter part, and 4K has been aligned, which makes the sequential reading and writing performance of titanium PC005 active solid state drive reach 3509.87MB/s and 2386.23MB/s respectively, and the sequential reading performance is up to standard, but the sequential writing performance is slightly lower than the official test data, but the overall performance is excellent.

When the parameter is 16G, the sequential read-write performance of titanium PC005 active SSD reaches 3505.32MB/s and 1259. 14MB/s respectively. The performance of sequential reading has little decline, and that of sequential writing has obvious decline, but the test results combined with HDTune are normal.

When testing with AS SSD benchmark software, the parameters of 1G and 5G are selected here respectively. In contrast, the difference in reading and writing performance is obvious in the corresponding part of 4K 64Thrd, and the result of sequential reading and writing is not much different from that of 4K. Among them, the sequential reading and writing performance of titanium PC005 Active is stable above 3000MB/s and 2300MB/s respectively, and the performance is stable.

According to the results of ATTO disk benchmark test, the reading and writing speed of 0.5KB small files can reach more than 68MB/s, which is obviously higher than some solid-state hard disks of the same type and specification. After 32K, the writing speed of Ti-PC005 Active is stable above 2240MB/s, and the reading speed is stable from 2700MB/s to 3000mb/s. ..

As can be seen from the above, although there are still some gaps between Titanium's PC005 active SSD and the first-line brand's high-performance SSD, the overall performance is still relatively stable, which can meet the needs of most people for daily games and office use. The five-year limited warranty also eliminates the worries of users. At the same time, TBW is much larger than some SSDs of the same specification, and the price advantage makes the titanium PC005 active SSD more cost-effective.

For users who pursue performance but have limited budget and think that the capacity of 5 12G is too small, if your computer supports RAID mode, it is suggested to directly select two titanium PC005 active solid-state hard disks of 5 12G or 1T to form RAID0, which can not only greatly improve the performance of hard disks, but also achieve the purpose of capacity expansion. However, it should be noted that RAID0 is not suitable for storing important data because of its low data security.

Finally, I hope to provide a special metal heat sink with the package and put the YMTC official SSD smart tool on the shelves as soon as possible.

Finally, attach the hardware configuration of the host.

The chassis adopts Antaike Windrunner DF700 Flux, a mid-tower chassis with wheels, supports 360 water cooling, and has five fans, five of which include three magic ARGB fans and 1 reverse fans. With its own lighting and power supply hub, you can connect five magic ARGB fans at the same time, or directly connect to the motherboard to realize lighting synchronization.

At present, many kinds of Windrunner DF700 flux chassis have obtained utility model patent certificates, which is also superior to similar chassis. Windrunner DF700 Flux front roof supports double 360 water cooling, and the front end also supports sandwich water cooling installation. Windrunner DF700 flux is easy to install and disassemble. The internal space capacity can accommodate most of the current graphics cards, power supplies, air cooling, etc. The number and location of openings can meet the needs of daily wiring.

The CPU is Ruilong 7 5800X, a brand-new Zen3 architecture blessing. Compared with the existing Zen2 architecture products, the Ruilong 5000 series CPU based on 7nm+ technology has an IPC upgrade of 19% and twice the L3 cache. Ruilong 7 5800X core 16 thread, mute frequency is 3.8GHz, and the maximum speed can be accelerated to 4.7GHz. It supports PCIe 4.0, the total * * * cache of L2+L3 is 36MB, and the TDP is 105W.

The motherboard is ROG Strix X570-F game, and the specification is ATX version. Please note that this motherboard does not have an integrated wireless network card. It is equipped with three full-length PCIe 4.0 x 16 motherboard slots+two PCIe 4.0 M.2 slots with radiator+eight SATA slots+four DDR4 memory slots. In terms of expansion, ROG Strix X570-F Gaming is equipped with Supreme FX S 1220 HD sound card, and it also provides three USB 3.1Type-A+1USB 3.1Gen2type-C+4USB 3.1.

The installed memory module is DDR4 3600 8G*2 sets of Yu Zhan NOX Diablo Goddess, and the vest is designed with mainstream common screwless aluminum alloy shell, with simple and beautiful overall shape. Yu Zhan NOX Diablo supports lighting synchronization with four main board manufacturers: Gigabyte, ASUS, MSI and Huaqing. The design of the light strip and the actual lighting display effect are excellent, and the lifetime warranty service is provided.

It is worth mentioning that many players who buy this set of memory see Samsung Bdie on the software side, including their own set. The default time is C 18-22-22-39.

The power supply comes from the old brand Antaike, which was established 35 years ago. The installation power supply is 850W Aetna NE850 gold medal full-module all-Japan capacitor, which provides free replacement service for 7 years after sale.

As the ATX standard power supply, Aetnaco NE850 adopts the mainstream design of fully smoked black shell, and is treated by spraying sanding process, which has the characteristics of anti-slip, wear resistance and dirt resistance, and its workmanship is relatively fine. The short fuselage design occupies less space in the power cabin, which avoids the trouble of considering the space size of the power cabin in the middle tower chassis and is more conducive to heat dissipation. Like similar high-end power supplies, Aetnaco NE850 has designed an independent power switch, which is located above the AC output interface of the power supply. The design of the independent power key is practical and easy to operate, eliminating the trouble of directly unplugging the power cord or closing the power socket.

Antaike NE850 adopts full-bridge LLC, DC-DC architecture and active PFC design, which are common in mainstream high-end power supply, and has synchronous rectification technology. Under the condition of 50% load, the conversion efficiency of super platinum can reach 93%. The full range input voltage supported by Aetnaco NE850 is 100~240V, which is better than passive PFC and more energy-saving.

The bottom of Aetnaco NE850 adopts intelligent temperature-controlled mute fan, which will automatically start the fan according to the actual use situation of high temperature and high load, and the power supply fan will stop running at low load and low temperature, so as to keep the running noise to a minimum, taking into account the characteristics of high efficiency heat dissipation and low noise.

The graphics card is SOUTAI RTX2070SUPER Extreme PLUS OC version, which is designed with three main fans and supports intelligent fan start-stop technology. Unlike most RTX graphics cards, Soutai RTX2070SUPER Extreme PLUS OC graphics card comes with an RGB 3D STORM backplane fan to improve the heat dissipation performance of the core area, which is very creative in design. In addition to improving the heat dissipation effect, it also increases the lighting display area. It is worth mentioning that Sotheby's RTX2070SUPER Extreme PLUS OC graphics card provides two small fan interfaces on the backplane, so I bought another small fan.

The radiator is water-cooled by Xingu Fengbing 360, and supports both intel and AMD platforms, that is, Intel LGA115x/1700/2011-v3. The front of the 360 water-cooled cold head of Xingu Fengbing adopts glass mirror design, with built-in high-definition display and Xingu logo inside. The light color at the top of the cold head is clear and beautiful, and the light switching is smooth and natural. The shell of the cold head is made of plastic, not nonmetal, and one end of the water cooling tube at one end of the cold head is L-shaped, which can be rotated and adjusted. At the same time, the night-proof design of the water cooling pipe effectively improves the use safety.

Xingu Fengbing 360 water cooling adopts copper base design, and the base with large area design can completely cover CPU. The surface of the base is relatively flat and smooth, and the contact area with water cooling liquid is increased by using 0. 1.5 mm macro-waterway technology, which further greatly improves the heat conduction effect.

Xingu Fengbing 360 water-cooled cold row is made of all-aluminum material, with fine workmanship, uniform distribution of thin fins, and slightly larger gaps between fins, which can ensure that the cold row is more easily blown by fans in a large area, thus facilitating rapid heat export. FEP polymer water cooling pipe is 48 cm long, which is soft and folding-resistant, and can meet the requirements of front, side or top installation of the whole tower bottom frame. The water cooling pipe is wrapped with a layer of woven net, which is strong in material, wear-resistant and scratch-proof, and also reduces the evaporation speed and service life of water cooling liquid to a certain extent.

This experience ends here. Thank you for watching.