Shijiazhuang University of Technology Chemical Equipment Co., Ltd. has successively won the honors of national key new products, technological innovation fund of scientific and technological enterprises, innovation award of scientific and technological enterprises, and well-known trademark of China. Its key components have won many national utility model patents, including atmospheric pressure, air tightness and vacuum, and the drying area is 4- 180 square meters. * * * There are more than 300 series products, which can provide various auxiliary equipment to meet the needs of users for drying various materials.
Application characteristics of disc dryer
(1) is easy to control and has strong applicability: 1. The drying process can be optimized by adjusting the thickness of material layer, spindle speed, number of rake arms, type and size of rake blades. 2. Each layer of drying tray can be heated or cooled by heating medium or cooling medium separately, and the temperature control of the material is accurate and easy. 3. The residence time of materials can be adjusted accurately. 4, the material flow direction is single, there is no backmixing phenomenon, the drying is uniform, the quality is stable, and there is no need to stir. (2) The operation is simple and easy. 1, the start-stop operation of the dryer is very simple. 2. After the feeding is stopped, the rake for conveying materials can quickly empty the materials in the dryer. 3. The equipment can be carefully cleaned and observed through special large inspection doors and mirrors. (3) Low energy consumption 1, thin material layer, low spindle speed, low power required by the material conveying system and low power consumption. 2. Conductive heat drying has high thermal efficiency and low energy consumption. (4) The operating environment is good, the solvent can be recovered, and the dust emission meets the requirements of 1. Atmospheric pressure type: Due to the low gas velocity and high humidity distribution in the equipment, it is difficult for dust to float to the top of the equipment, so the tail gas discharged from the top humidity outlet contains almost no dust. 2. Sealed type: equipped with solvent recovery device, which can conveniently recover the organic solvent in the gas with moisture. The solvent recovery device is simple and the recovery rate is high. For flammable, explosive, toxic and easily oxidized materials, nitrogen can be used as wet carrier gas for closed-loop circulation to make them run safely. Especially suitable for drying flammable, explosive and toxic materials. 3. Vacuum type: The disc dryer operates in a vacuum state, which is especially suitable for drying heat-sensitive materials. (5) The installation is convenient, and the floor space is small (1). The dryer leaves the factory as a whole and is transported as a whole. It only needs to be hoisted in place, and the installation and positioning are very easy. 2. Because the drying trays are arranged in layers and installed vertically, the drying area is large and the floor space is small.