What are the raw materials and processes used to produce emulsified oil turning agents?

Emulsified cutting oil (liquid) formula

Formula 1 dosage (g)

Sodium petroleum sulfonate 10 - 12

Sodium nitrate 0. 5

Transformer oil 0. 5

Sodium hydroxide 5

6 #Gasoline oil 84-82

Formula 2 dosage (g)

Sodium petroleum sulfonate 10

Sulfonated oil 10

Triethanolamine 10

Oleic acid 2. 4

Potassium hydroxide 0.6

Water 3

5 #High-speed engine oil 64

Recipe 3 dosage (g)

Potassium tripolyphosphate 3

Ricinoleic acid diethanolamine salt 4

Sodium nitrite 5

Triethanolamine 9

Sorbitol 15

Benzoic acid 2.4

Boric acid 3.6

Water 48

Technology, performance, use

Formula 1 and 2 are to add other components to the reaction kettle in addition to sodium hydroxide and potassium hydroxide, and then add water-soluble Sodium hydroxide and potassium hydroxide are heated to a high temperature, and the materials are mixed evenly under stirring. After cooling, it is ready; Formula 3

First add benzoic acid and boric acid into the reaction kettle, then add water, wait until complete After dissolving, add the remaining components and mix the materials evenly with stirring. This group of products has good lubricity, stability, anti-wear, anti-foam, anti-oxidation, anti-corrosion and anti-bacterial properties.

The pH is between 6-10.5 and is used for Cutting of metal parts and precision machined parts can improve metal surface finish and extend tool life.