The special heat pump type constant temperature dehumidifier for swimming pool uses the principle of "air conditioning" to "transfer" the energy of air or water into water, thus achieving the purpose of heating water. Because the heat pump only consumes its own running energy, it "transfers" the external energy into the water, achieving high efficiency and energy saving. The operating cost of heat pump type constant temperature dehumidifier for swimming pool is only 50% of that of gas boiler and 30% of that of (direct) electric heater.
The heat pump type constant temperature dehumidifier for swimming pool is driven by electricity, and can be installed in any space such as indoor, outdoor, floor or ceiling according to your requirements, which abandons many restrictions such as the safety hazard of traditional heating boiler explosion, smoke and noise pollution, installation location and appearance requirements, and the complicated approval and locking caused by it.
2. The application of heat pump constant temperature dehumidifier (three-in-one) for Nautilus swimming pool in indoor swimming pool.
(1) Air conditioning, dehumidification and pool water heating in general swimming pools.
For a healthy swimming pool, the daily energy consumption is mainly the cost of air conditioning, summer refrigeration, winter heating and pool water heating, so it is very important to choose the appropriate air conditioning and pool water heating system. For the air conditioning and hot water design in the swimming pool area, there are generally the following problems:
1, harmful to health: due to a large amount of water evaporation and chlorine volatilization in the swimming pool area, the water vapor content and chlorine content in the air increase, which seriously affects the health of swimmers.
2. The problem of dehumidification is serious: in the process of air conditioning design, besides meeting the indoor air requirements, the adjustment of humidity is more important. The swimming pool area is a high humidity environment, and the content of water vapor and chlorine in the air is high, which is easy to produce a large number of bacteria, molds and viruses, which is easy to destroy indoor air quality and decorative materials. Dehumidification process is the main problem of swimming pool all year round.
3. High operating costs: For business premises, the level of daily operating costs in the future largely determines the profitability of the project. Traditional air conditioning and water heating can't realize the comprehensive utilization of energy, which will consume a lot and cause amazing waste.
4. There are a lot of supporting equipment, which is difficult to operate: there are a lot of air conditioning and heating equipment installed traditionally, which requires operators to operate many equipment skillfully. On the one hand, it requires high operators, on the other hand, the equipment is scattered, the operation is difficult, and energy is wasted.
(2) A special heat pump type constant temperature dehumidifier for swimming pool creates a high-grade and comfortable swimming pool environment.
Indoor swimming pools are very strict about dehumidification. Therefore, the dehumidification heat pump is specially designed and manufactured to solve the problems related to indoor swimming pools. It integrates the three functions of pool water heating, dehumidification and air conditioning, keeping the indoor swimming pool at constant temperature and humidity, and the energy consumption is far lower than other methods. In addition, the special heat pump type constant temperature dehumidifier for swimming pool designs and manufactures various types of indoor swimming pool heat pumps. According to your actual requirements, consider the comprehensive utilization of energy as much as possible to build a suitable swimming pool for you.
1. Healthy and comfortable swimming pool: The indoor swimming pool meets the requirements of human comfort in terms of water quality, temperature and humidity, lighting and pungent smell, reflecting its high-grade level.
High quality water quality and color give people great comfort. When the water quality of swimming pool needs to be crystal clear, it needs ozonization and light distribution. When treating water, adding a small amount of sodium hypochlorite is beneficial to keep the water clear. Ozone treatment and ozone removal for high-end swimming pools can greatly reduce the amount of sodium hypochlorite in water, effectively reduce the chlorine content in indoor air and reduce the stimulation of chlorine smell to human body.
2. Energy-saving swimming pool: In winter, in order to avoid a lot of energy waste caused by ordinary ventilation, the swimming pool adopts a special heat pump type constant temperature dehumidifier, which integrates the three functions of pool water heating, dehumidification and air conditioning, and can control the humidity of indoor space within the most comfortable range of 55-70%, while the indoor pool water temperature is generally controlled at 26-28℃ (stipulated in the design specifications for water supply and drainage of swimming pools and water recreation pools), and the air.
3, intelligent swimming pool: fully automatic operation, convenient management. The use of a hybrid "three-in-one" special heat pump type constant temperature dehumidifier for swimming pool can make the swimming pool area of the clubhouse independently managed, meet the air conditioning requirements of indoor constant temperature swimming pool in all seasons, and greatly facilitate the operation and management of equipment. The control part of heat pump mainly includes water temperature controller, room temperature controller and humidity controller. The automatic control system can realize automatic remote control, and the indoor temperature and humidity and pool water temperature can be set at will, which has reached the use requirements. Dew point temperature sensors are adopted to avoid condensation on indoor glass windows and external walls as much as possible.
In a word, considering the adaptability of people's five senses, every part of the indoor swimming pool is considered by swimmers. With the design concept of quality, performance and energy saving, we will bring you a perfect indoor swimming pool, so that your investment will not only bring rich returns, but also a brand-new experience of enjoying life!
Special heat pump type constant temperature dehumidifier for swimming pool (three-in-one heat pump-constant temperature and humidity swimming pool system)
3. Working principle and operating instructions of Nautilus Trinity Heat Pump.
Working principle of nautilus trinity heat pump
Three-in-one heat pump series is a product specially developed for indoor swimming pools. It integrates air conditioning, dehumidification and pool water heating, recovers and comprehensively utilizes a lot of energy, overcomes many problems such as high humidity and high chlorine environment, and realizes efficient and energy-saving operation through the change of operation mode in spring, summer, autumn and winter. Its working principle is as follows:
The working principle of "Nautilus" trinity heat pump is simply to recover the heat lost by vaporization on the surface of pool water and transfer it to the pool water and air to make up for the heat loss of pool water and air, and at the same time realize the function of air conditioning dehumidification. Its working procedure can be roughly divided into two steps:
Step 1, warm and humid air flows through the lower part of the heat pipe heat exchanger and the evaporator, and the temperature drops, so that warm water vapor condenses into cold water droplets and is separated from the air, so that the air is dried and dehumidified, and the air dehumidification function is realized; At the same time, the heat energy released during air cooling, water vapor condensation and cooling is absorbed by the refrigerant.
Step 2, the heat energy absorbed by the refrigerant firstly heats the pool water through the heat exchanger to realize the pool water heating function; The residual heat heats the cooled air through the upper part of the heat pipe heat exchanger and the air condenser to realize the function of air heat preservation.
Because heat energy will be conducted through walls and windows, and fresh air will be lost, it will be generated by the heat pump type constant temperature dehumidifier dedicated for swimming pools.
When the heat energy of the special heat pump type constant temperature dehumidifier for swimming pool (three-in-one heat pump-constant temperature and humidity swimming pool system) is insufficient to meet the requirements, the auxiliary air heater can supplement the heat energy needed for indoor heating. As long as the special heat pump type constant temperature dehumidifier for swimming pool provides its own running electric energy, it can continuously circulate according to the above working procedures, and realize the harmonious balance of the three functions of "pool water heating, air conditioning and dehumidification" with low energy consumption. Three-in-one special operating conditions:
(1) winter auxiliary heater configuration by stages. In cold winter, when the ambient temperature is low, the heat pump can't keep the indoor constant temperature completely, and it needs to rely on auxiliary heating to supplement energy.
The first one is to use the electric heater installed on the air duct to directly heat the air, and add the electric heater step by step according to the indoor air temperature, thus avoiding the waste of equipment investment or operating expenses.
The second is to heat (cool) the air by installing a surface cooler on the air pipe. We directly connect hot water (chilled water) to the surface cooler, and realize the heating (cooling) of air through multi-stage heating.
(2) A brand-new spring and autumn wind operation mode.
This is a heat pump constant temperature dehumidifier specially designed for swimming pools. When the outdoor air meets the requirements of indoor air in transition season (air temperature 15℃~26℃ and relative humidity less than 60%), it will run in a brand-new air operation mode. At this time, there are only two fans working in the heat pump, so its energy saving is obvious.
Fourth, the structural characteristics of the special heat pump type constant temperature dehumidifier for swimming pool
1, heat pump compressor. Adopt scroll compressor, no reciprocating mechanism, simple structure, small volume, light weight, few parts (especially wearing parts) and high reliability; Stable operation, simple operation, easy automation, and high efficiency within its adaptive refrigeration capacity range; Low noise.
2. Compressor refrigerant R-407C. The working medium of the compressor is R-407C, 100% fluorine-free, which does not produce greenhouse effect and destroy the ozone layer; Can directly replace R22, and can use lubricating oil such as mineral oil; High energy efficiency ratio. Experiments show that it saves energy 12.5% to 25% compared with traditional refrigerants.
3. Heat pump heat exchanger. Adopt titanium tube heat exchanger, PVC shell, heat exchanger has corresponding anti-corrosion measures and quality warranty service.
Five, swimming pool special heat pump type constant temperature dehumidifier system advantages
1, environmental protection and safety. The heat pump constant temperature dehumidifier for swimming pool is an excellent environmental protection product. The heat pump unit completely adopts the advanced "grain wheel" scroll compressor, which is driven by electricity and has no tail gas emission. Its running noise is low, and it can be placed in the open air, which avoids the environmental pollution caused by the tail gas produced by gas, and eliminates the hidden dangers of fire fighting and explosion caused by the existence of liquefied petroleum gas and diesel oil.
2. High efficiency and energy saving. The heat pump unit adopts a number of patented technologies of our company, and the comprehensive COP coefficient is high, which greatly improves the operation efficiency of the equipment. Its operating cost is only 1/4 of direct-fired electric heating. The heat pump integrates dehumidification, air conditioning and pool water heating, and the operation energy consumption is obviously saved. Compared with traditional ventilation dehumidification, the average cost is saved by 40 ~ 60%.
3. This structure is resistant to chlorine corrosion. Specialized design and manufacture make the heat pump constant temperature dehumidifier for swimming pool effectively avoid the corrosion of a small amount of residual chlorine in the air to the air conditioning host. All key components (compressor, control system, etc.). ) installed in a compartment isolated from the return air of the swimming pool. The shell and structure of the unit are sprayed with epoxy anticorrosive paint, and the air heat exchanger is sprayed with anticorrosive materials. All copper coils can be selected.
4. Intelligent control and convenient management. Using the heat pump type constant temperature dehumidifier special for the three-in-one swimming pool can make the swimming pool area of the clubhouse be managed separately, and the operating cost can be calculated separately, which can meet the air conditioning needs of the indoor constant temperature swimming pool in all seasons, and is fully automatic and convenient to manage.
5. Advanced technology. The company cooperates with famous American swimming pool equipment manufacturers, draws lessons from foreign advanced technology development concepts, and combines the advantages of domestic university technology development; Constantly develop new technologies and processes to meet the needs of domestic customers.
6, stable and reliable performance. The key components of refrigeration system and control system, such as compressor, thermal expansion valve and electronic appliances, are imported products with reliable performance.