1. Connect one end of the cable to the output control cable connector on the vibrator, and the other end to the output control cable socket on the back of the electrical box, and tighten it.
2. Clean the connection surface of the welding head, connect it to the transducer of the vibrating tube, and lock it with a wrench. Note: When connecting, you must ensure that the two connecting surfaces between the welding head and the transducer match and are locked. Do not allow the connecting screws to be too long or the sliding teeth to be unable to be locked, otherwise the sound wave transmission will not be smooth and the unit will be damaged.
3. When loading and unloading the welding head, you must use two wrenches to lock the welding and transducer respectively. Do not lock or remove only one part to avoid damage to the portable vibrator.
4. After checking that points 1 and 2 are properly installed, plug the power cord socket into the external power socket and turn the power switch. The power indicator light will turn on.
5. Press the sound wave control switch lightly. At this time, you can hear the "squeak" sound made by the welding head when the sound wave is transmitted to the welding head, indicating that the machine is working normally and can be put into use.
6. When the machine is working abnormally, do not disassemble the equipment without permission. Please notify the supplier or send the equipment to the manufacturer for inspection and repair.
Extended information
Method of fusion welding
Method of welding
The welding head vibrating at ultrasonic ultra-high frequency under moderate pressure, The joint surface of two pieces of plastic generates frictional heat and instantly melts and joins. The welding strength is comparable to the main body. Using suitable workpieces and reasonable interface design, it can achieve watertightness and airtightness, and eliminate the inconvenience caused by the use of auxiliary products. Achieve efficient and clean welding.
Riveting welding method
The ultrasonic ultra-high frequency vibration welding head is pressed against the protruding tip of the plastic product, causing it to instantly heat and melt into a rivet shape, making materials of different materials Mechanically riveted together.
Implantation
With the propagation of the welding head and appropriate pressure, metal parts (such as nuts, screws, etc.) are instantly squeezed into the reserved plastic holes and fixed at a certain location. Depth, after completion, both pulling force and torsion are comparable to the strength of traditional in-mold molding, which can avoid the shortcomings of damage to the injection mold and slow injection.
Baidu Encyclopedia - Handheld Ultrasonic Welding Machine
Baidu Encyclopedia - Ultrasonic Welding Machine