A, container wall introduction:
Container wall, that is, integrated wall, is a new wall decoration material introduced on 20 10. The patent name is integrated wall, which is made of aluminum alloy, sound insulation foam and aluminum foil. The surface not only has colorful patterns possessed by wallpaper and paint, but also has a strong three-dimensional effect and a concave-convex surface. It is the replacement of wallpaper and paint.
Second, the container wall standard:
Nine-story standard structure of container wall:
The first layer: sand rubbing layer: brick wall and cement wall are reinforced and leveled.
The second layer: functional layer: water sealing, alkali sealing and reinforcement are carried out on the soft ground sand base or the old wall base. In this paper, the method of sealing alkali and removing nitrate is used to deal with the phenomenon of cement sand rubbing the wall and turning over alkali and removing nitrate.
The third layer: joint filling layer: repair the joints between plates, and apply joint filling tape for joint treatment to prevent cracking.
The fourth layer: repair layer: repair the trunking, straighten the angle of yin and yang, and fill up the large potholes on the wall surface to make it quickly solidify and harden.
The fifth layer: the thick leveling layer can fill a large area of uneven wall at one time, leveling quickly at one time, without collapsing, shrinking or cracking, ensuring the affinity and adhesion of the same product.
The sixth layer: fine leveling layer: high-quality inorganic gelled putty is selected as the putty-type surface leveling material to increase the handle, fineness and aging resistance of the top coat.
The seventh layer: primer layer: the putty base layer is reinforced and sealed with alkali, at the same time, the amount of topcoat is reduced and the adhesion of the bottom surface is increased.
The eighth layer: touch-up layer: after painting the primer, check and repair the obvious sand holes, holes and defects for the last time.
The ninth layer: topcoat layer: the topcoat layer realizes the functions of hand feeling, waterproof, dirt resistance and aging resistance, and at the same time realizes the beauty and texture of the topcoat.