Question 1: Which brand of xenon lamp is good? Philips and Orans lamps are currently the best
But you really don’t need them to be so expensive
Generally speaking, buy domestic brands such as Heidi and Sherrett for the brightness of the bulbs. It is very ideal
And the practical life is also very long, generally it can be used for 3-4 years without problems
Question 2: What are the advantages and disadvantages of using xenon lamps in cars? Advantages
The color temperature of xenon lamps ranges from 3000K to 12000K. The color temperature of 6000K is similar to sunlight, but contains more green and blue components, so it appears blue-white light. This blue-white light greatly increases the brightness of road signs and signage.
HID has a brightness efficiency three times higher than that of halogen lamps, and has a significant effect on improving the clarity of driving vision at night and in fog.
The luminous flux emitted by xenon lamps is more than twice that of halogen lamps. At the same time, the efficiency of converting electrical energy into light energy is more than 70% higher than that of halogen lamps, so xenon lamps have relatively high energy density and light intensity. The increased brightness of car lights also effectively expands the visual range in front of the car, thereby creating safer driving conditions.
Save 1/2 electricity, halogen lamps consume more than 60W of electricity, while xenon lamps only require 35W of electricity.
Since xenon lamps do not have a filament, there will be no problem of scrapping due to broken filaments. The service life of xenon lamps is much longer than that of halogen lamps. The service life of xenon lamps is equivalent to the entire running time of the average car life cycle. .
Once a xenon lamp fails, it will not go out instantly. Instead, it will go out gradually (or light up quickly), allowing the driver to gain time when driving in the dark and pull over in an emergency.
Disadvantages
The light concentration is not good. There are two reasons for the lack of light concentration:
Improper matching of the bulb and lamp cup.
The installation is not in place or the debugging is not done properly.
The fault light is on because the original car's light bulb has a large power loss (55W) and the xenon lamp has a small power (35W), so after modification, it has insufficient power and triggers an alarm. As a xenon lamp, its starting current is 8A. , and the original car is 6.2A Qicheng, so the circuit setting of the original car does not match. You need to go to the 4S store to change the circuit mode.
Automatic flameout is caused by electromagnetic interference caused by excessive starting current. This can be done by moving the ballast away from the engine during installation or by replacing it with a low-current starting ballast.
Question 3: Which brand of xenon lamp is better? Because xenon lamp, xenon lamp is three times as bright as ordinary car light, but the power consumption is only half of ordinary lamp, and the service life of xenon lamp is 5 times that of ordinary lamps; so from the perspective of quality, many car owners will choose car xenon lamps, but which brand of xenon lamps is good and how should they be considered? Today I will introduce to you the top ten car xenon lamp brands:
1. The top ten car xenon lamp brands first recommend Philips HID xenon lamps. Currently, Philips xenon lamp products use UV-resistant quartz glass. , can effectively protect lamps. The product series includes Diamond Vision, Crysta Vision, Blue Vision, Vision Plus and Silver Vision
Blue Diamond Light: It can reach a color temperature of 5000K (the color temperature of ordinary halogen lamps is only about 3000K), which is the highest color temperature among all five products, so when it shines, you can see dazzling white light output.
Silver Warrior: The 4300K ??stylish white light has excellent reflection on the ground and signs. It is currently the best-selling Philips upgraded product.
Blue Warrior: With a color temperature of 4000K, it is the best high color temperature bulb in terms of bright light performance. Since its price is cheaper than Silver Warrior, it is very cost-effective.
Super bright light: Its color temperature is not high at around 3600K, but it has 50% more light output than ordinary light bulbs. At the same time, the light beam is 10-20 meters longer, so it is brighter and illuminates more. Far.
Silver Fox Light: 4000K color temperature, it is characterized by a silver coating on the lamp head. When the light is not turned on, the bulb cannot be seen, making the entire bulb and lamp completely invisible. All in one, very fashionable.
2. The second recommended top ten automobile xenon lamp brand is OSRAM xenon lamp, OSRAM XENARC? HID xenon lamp modification kit, the existing product range includes the modification of H1, H4, H7 and HB4 , color temperatures are available in 4200K and 6000K. Through xenon discharge technology, we provide drivers with smarter, brighter and more durable lighting options for their journeys. The beam of HID xenon lamps is farther and wider than ordinary halogen lamps, thus greatly improving the lighting in front of the car, making the driver's field of vision wider and the journey safer. This product can be found in 4S stores, auto parts stores, car beauty shops, and car modification shops.
3. The second recommended brand of xenon lamps for automobiles in the top ten is Hella xenon lamps. Hella is a well-known international brand and has shown considerable stability and brightness characteristics in tests. Start It reaches 20% brightness in about 1 second. The power output and brightness tend to stabilize after 28 seconds of powering on. After stabilization, the brightness reaches 3200-3400 lumens. Its brand and quality advantages are relatively obvious.
4. The fourth place is Sherlite xenon lamp. Sherlite xenon lamp is the only product with independent patent in Asia, and its OEM share in Asia is more than 50%. It is the only company in Asia that has passed the European E-mark certification. Currently, the products on the market have a continuous flash frequency of 65,000 times. Our company's products have a continuous flash frequency of more than 100,000 times without failure. We are the largest xenon lamp production base in Asia.
5. The fifth place is Jiasimeng xenon lamp. Jiasimeng Industrial Co., Ltd. was established in 1996 and is one of the earliest professional companies in China to produce HID gas discharge lamps. At present, the company has developed more than 30 series of products including FAW Toyota, GAC Toyota, FAW Volkswagen, Guangzhou Honda, Dongfeng Honda, Beijing Hyundai, Shanghai GM Buick, Shanghai Volkswagen, and Nissan.
6. The sixth place is Klaheite xenon lamp. Klaheite HID series are popular in Europe, America and Southeast Asia because of their high quality, excellent service and reasonable price. They are popular among car modification companies in many parts of the world. Favored by modders. Klahit’s xenon lamp products have a complete range of models, including H1, H3, H4-1, H4-2, H7, H11, 9004, 9005, 9006, 9007 and other models. They can be used for matching and modification of various imported and domestic models, and in Mainland China has insured China's Ping An Product Liability Insurance and is one of the HID xenon headlights recommended by international professional car modification institutions.
7. The sixth place is Opjie xenon lamp. Guangzhou Opjie Electronic Technology Co., Ltd. is a company specializing in R&D, production, service and sales of automotive xenon headlights HID (full name in English is High Intensity Discharge Lamp)...>>
Question 4: What are the benefits of car hernia lamps. The main features of choosing a xenon lamp are as follows: 1. High brightness; its illuminance is 5-10 times that of a halogen lamp; 2. Long life; due to the working mode of gas discharge, the life is relatively long, conservatively speaking, it is 3-5 times; 3. Low energy consumption; the general power is about 30-45W, and the halogen lamp is about 50-90W; 4. Good color rendering; the spectral color is close to that of sunlight, and the display object has high definition. 5. Disadvantages: The cost is relatively high; maintenance requires technical content; the form of gas discharge is not suitable for high and low light interchange. At present, the xenon lamps on the market are mixed. There are dozens of imported, domestic, and OEM products on the market. Many products are actually the same product from the same manufacturer. Xenon headlights are components with very complicated processes and technologies. Poor xenon lights often have a short lifespan, and their color temperature, brightness, and scattering angle do not meet the requirements. Therefore, it is best to choose products from well-known manufacturers.
For domestic brands with relatively good quality, you can choose Tiejiangjun, Xuelite and other brands.
Generally, newly installed xenon lamps have little to do with the car model; most of the xenon lamps currently on the market do not have matching lenses; the ones that do have matching lenses are very expensive, with the lowest being about 3,500 or more. ; And the car models that can be installed are also limited; so if it has already been installed, it is not easy to install a lens; you can ask the brand merchant of the xenon lamp you installed, if it is a relatively large brand, it may be available.
The hernia lamp is an integrated version of H4. It is recommended to choose brands such as Sherlite, Coolte, and Benbawang. The price is around 800-1,200 yuan, and those from second- and third-tier manufacturers are around 400-650 yuan; like The prices of Bose, Philips, Osram and other brands are around 2,600-12,000 yuan; however, there are not many genuine products on the market now.
Because xenon lamps are gas discharge lamps, there will be a delay to some extent after any xenon lamp is turned on; but it is not very long; this is true not only for xenon lamps, but also for any gas discharge lamps.
Question 5: Which brand of xenon lamp is good? There are many brands of xenon lamps. Comparing various indicators, the domestic xenon lamp "UPS Apa" is currently produced, while the foreign one is Osram.
1. How to distinguish the quality of a xenon lamp from several aspects
1. Fine workmanship. A good product must have fine workmanship. For xenon lamps, It is to check whether the shape of the bulb is round, whether the position of the bulb is appropriate, whether the glass of the lamp tube is vertical enough, whether the transparency is high, and whether there are bubbles.
2. Power, the power of xenon lamp cannot be greater than 55w. 55w is the highest power of xenon lamp now. Generally, 35w is the best, and the higher one is 45w. 55w is very dangerous. a number.
3. Lumens, the greater the lumens, the higher the brightness. Everyone knows that the longer the bulb is used, the lower the brightness. If the brightness of the bulb is not high at the beginning, then the xenon lamp will be lost. At the starting line, the service life is much shorter than that of high-quality xenon lamps, so this is very important. Now the lumens of xenon lamps are basically more than 3000 lumens, and a good xenon lamp must have at least 3000 lumens.
The above points can be seen from the appearance of the light bulb, but when we bought a xenon lamp, in addition to these features that can be seen on the outside, we also need to conduct a lighting test, so that it can be completely " Tell the difference between good and bad xenon lamps."
In order to comprehensively test the light bulb, it is necessary to assemble the light bulb, ballast and lens. Some people have questions here. Needless to say, the ballast is necessary, but why should the lens be installed? Here I Just ask to modify your car lights in a civilized manner. If you want to modify xenon lamps, please bring a lens. Otherwise, it will not only affect your own car lights, but also cause trouble to other people.
2. Take the current mainstream APA xenon lamp as an example. The light emitted by a good xenon lamp after being powered on should have the characteristics
1. Brightness: a good The light of the xenon lamp should be uniform. In addition to the high brightness of the focus, the brightness of the surrounding illuminated area should also be clearly visible without spots.
2. Lens light type: The mainstream light types on the market now are the light types of Hella 5 and q5. The designs of these two light types are different, but the light emitted must be bright enough. And it shows the characteristics of the light pattern. After all, a lens only condenses light, and the light is still a bulb. If the brightness of the bulb is not good with a lens, it will be even worse without a lens.
A final reminder: When modifying a xenon lamp, you must modify all the components, that is, the bulb, ballast, and lens together. If you make such a set of modifications, don’t forget to add the lens. There is no need to save so much money on naked modifications. Xenon lamp. Hope this helps you
Question 6: Are xenon lamps good? 1. The color temperature is high and the light color is blue. Looks more handsome. The K number is the symbol of the K number. The color temperature of general halogen lamps is below 3000. Xenon lamps generally start at 4500k. 7000k is very common. Two days ago, I saw a friend saying that there is a 12000k xenon lamp. It was crazy. The blue must have turned purple. A high K number is generally closer to daylight and easier to accept, but I think the real benefit of a high color temperature is just that it looks good, and other effects are of little importance.
2. High brightness. Note that color temperature and brightness are fundamentally different concepts. The xenon lamp is not bright because of the high color temperature, but because of the high brightness.
The unit of brightness is lumens, and the number of lumens of xenon lamps is generally three times that of ordinary halogen lamps.
3. Other things like low energy consumption and long lifespan have little to do with us. ■Several issues you must understand before installing xenon lamps:
1. Classification of xenon lamps. Xenon lamps are divided into six types according to the form of bulbs. High beam with lens, low beam with lens (the above two lights are generally used in original xenon lamp systems such as PST, Audi, etc.) h1 (high beam bulb), h3 (fog lamp), h4 (high and low beam) bulb), h7 (low beam bulb)
2. There are generally two ways to modify the xenon lamp system,
a) One is a more luxurious general modification - that is, headlights Total name and bulbs replaced. The effect of this method is not bad, but it has two limitations. First: the price is too high; Bora's Hella assembly costs more than 10,000, while Hella's bulbs cost 4,000-5,000. The second assembly is limited by the original manufacturer's accessories. If the model does not have a xenon lamp assembly at all, there is nothing you can do.
b) The second one is just to replace the light bulb.
3. Modification process: Just replace the xenon lamp with the bulb. The product contains four parts: booster and ballast. The above two items are iron boxes the size of cigarette boxes, which can be fixed to the car. The bulb ,wire. There is no need to modify the wiring, just connect the wire originally connected to the light bulb to the booster. Very simple.
4. Risks that must be considered before deciding to modify:
a) Regarding the issue of high-frequency interference: xenon lamps require a high voltage of 35,000 volts at the moment of starting. There is a certain possibility that it will interfere with the electrical appliances in the car, such as the stereo, and the Bora seems to interfere with the windshield wipers. The probability of it happening is very small, but it is possible and you need to be mentally prepared.
b) Regarding the issue of penetrability: the k-number of xenon lamps is relatively high. According to optical principles, the higher the k-number, the easier it is to be covered by lights with low k-number. General street lights are only less than 2000k. The effect is not obvious. Need to adapt. But if you look at the reflector, you will know that the light is bright enough. The darker the surrounding environment, the better the effect of the xenon lamp. Especially when walking on the mountain road at night, you will find his cuteness. But there is a problem worth noting: the penetrating power of xenon lamps is relatively poor in rain, snow and fog, and it drops sharply. Brothers who like extreme off-roading need to consider this. From the perspective of practical application, during the several rains and snows in Beijing, I felt that although the penetrating power of xenon lamps decreased, it was not much worse than that of halogen lamps, because its brightness was reduced by half and it was still brighter than halogen lamps.
c) Regarding the problem of light horn: Due to the characteristics of the xenon lamp itself, it takes several seconds from lighting up to maximum brightness. Maybe it doesn’t feel like flashing the headlights at will. Judging from the actual feedback, it is not that serious: First of all: when the headlights are flashed for the first time, the light is relatively weak, but again - but it is enough for half the brightness, which is much brighter than the halogen light. Moreover - there will be basically no lag in brightness when the headlights are flashed afterwards. It should be the function of the capacitor. Xenon lamps will not have a big impact on the light horn.
d) Regarding the effect of xenon lamps after installation: The most important effects on the effect after installation are two:
First, the lighting must be adjusted light. Because xenon lamps are inherently very bright, if they are not adjusted properly, they will have a great impact on other vehicles. So be sure to dim it, for the sake of others. The second is very important: it is the quality of the lamp itself - this is something we cannot change: Generally speaking: the round lamp bowl with separate high and low beams is very effective, and the worst effect is the integrated high and low beam. Among the lamps with square lamp heads, Bora is the worst. Unfortunately, Xiaoqie is like this. I didn't take a close look at Xiaoqie's lamp. If you are interested, you can take a closer look at Xiaoqie's lighting to see if it is very divergent, if not. It shouldn't be a big problem. If it's too divergent, forget it.
e) Safety issues...>>
Question 7: Which is better, xenon lamps or LEDs for automotive lighting? People always compare xenon lamps and LEDs To compare with car lights, especially when choosing to modify car lights, you will always be a little hesitant about whether to use xenon lights or LED car lights. In fact, if you understand the respective advantages and disadvantages of xenon lamps and LED car lights, you can choose which one according to your own needs.
So next, let me share with you the advantages and disadvantages of xenon lights and LED car lights.
First, let’s talk about the advantages of xenon lamps:
1. The color temperature of xenon lamps ranges from 3000K to 12000K. The color temperature of 6000K is similar to sunlight, but contains more green and Blue component, so it appears bluish-white light. This blue-white light greatly improves the brightness of road signs and signs;
Second, HID has a brightness efficiency three times higher than that of halogen lamps, which has a significant effect on improving the clarity of driving vision at night and in fog. ;
Third, the luminous flux emitted by xenon lamps is more than twice that of halogen lamps. At the same time, the efficiency of converting electrical energy into light energy is more than 70% higher than that of halogen lamps, so xenon lamps have relatively high energy density and Light intensity. The increase in the brightness of car lights also effectively expands the visual range in front of the car, thereby creating safer driving conditions;
Fourth, save 1/2 power, halogen lamps consume more than 60W of electricity, xenon The lamp only needs 35W of electricity;
5. Since the xenon lamp does not have a filament, there will be no problem of scrapping due to broken filament. The service life of the xenon lamp is much longer than that of the halogen lamp. The service life of the xenon lamp is equivalent to The entire operating time during the average car life cycle;
6. Once a xenon lamp fails, it will not go out instantly. Instead, it will go out by gradually dimming (or lighting up quickly), so that the driver can Gain time when driving in the dark and pull over in an emergency;
Of course, while xenon lamps have the above advantages, they also have the following disadvantages
First, the light concentration is not good. There are two reasons for not focusing. Factors in several aspects:
Xenon lamp bifocal lens assembly
1. The bulb and lamp cup are not properly matched;
2. The installation is not in place or there is no Debugging is good.
Second, the fault light is on because the original car's light bulb has a large power loss (55W) and the xenon lamp has a small power (35W). Therefore, after modification, its power is not enough and the alarm is triggered. As the starting current of the xenon lamp It's 8A, and the original car is 6.2A, so the circuit settings of the original car don't match. You need to go to the 4S store to change the circuit mode.
Third, automatic flameout is caused by electromagnetic interference caused by excessive starting current. This can be done by moving the ballast away from the engine during installation or by replacing it with a low-current starting ballast.
Fourth, this problem is mainly reflected in the Haima series, especially the 323 and other cars. Because the power supply is controlled by the dimming circuit, it draws power directly from the battery. The power supply of the headlight circuit is too light, so xenon is installed. The light does not light up. It is necessary to install an additional circuit, otherwise the high beam indicator light will not light up. After installing the retractable lamp, if the circuit is not installed correctly, it will easily cause insufficient power supply to the high beam and cause the light to shake. Especially for retractable lights priced below 1,000 yuan, the high beam jitter is more obvious when the road surface is uneven. You can find a professional to install a circuit with the correct voltage, or purchase a xenon lamp costing more than 1,000 yuan to solve the problem.
Next, let me tell you about the advantages and disadvantages of LED car lights.
First of all, the advantages of LED car lights:
1: Long life, generally up to tens of thousands or even hundreds of thousands of hours. Some people believe that if future car lighting uses LED, the lamps will not need to be replaced throughout the car's service life;
2: High efficiency and low energy consumption. LED light sources can directly produce red, amber and other colors required by automobile lamps without color filtering, without loss, and the power utilization rate is as high as 80% or more;
Three: High light quality, basically an environmentally friendly product No radiation, "green" light source;
Four: LED has a simple structure, an internal bracket structure, and is sealed with transparent epoxy resin around, with good earthquake resistance;
Five: Light up No delay, fast light response (nanosecond level), suitable for fast-moving objects;
Six: Suitable for low-voltage operation, can be applied to cars;
Seven: LEDs occupy a small space, and designers can change the lamp mode at will to diversify the car's shape. Automobile manufacturers favor LED, which is entirely determined by the advantages of LED itself.
Of course, LED car lights also have the following disadvantages compared to xenon lights:
1. High cost. Taking LED reversing lights as an example, an LED reversing light costs nearly 30 yuan. , and the price of a light bulb is only 3 yuan, most of which is the cost of LED lights. The high price makes it impossible for ordinary cars to install LED lights, and the market cannot be promoted.
2: It is difficult to popularize LED car headlights. They have poor heat dissipation and are prone to light decay if heat dissipation is not handled properly. Affects the service life of car lights.
Three: There are no industry standards and product quality varies;
Four, there is a problem with light pattern design...>>
8: Which is better, xenon lamps or LED lamps? The comparison between xenon headlights and LED headlights has always been a problem that every car owner encounters when modifying their car lights. Xenon lamps have the advantages of xenon lamps, and LED lamps also have the advantages of LED lamps. Modifiers It's hard to choose between these two. I have written down the advantages and disadvantages of these two car lights, xenon lights and LED lights, to provide you with a clearer comparison. You can clearly know whether xenon headlights or LED headlights are more suitable for your car needs.
1. Advantages and disadvantages of LED headlights
LED car lights refer to car lights that use LED (light-emitting diodes) as the light source. Because LEDs have the characteristics of high brightness, rich colors, low power consumption, and long life, LEDs are widely used in the automotive field.
For LED car lights, the ideal thing is to use LED light sources to replace traditional light sources. LED lights have a wide range of uses.
Advantages of LED car lights:
1. Energy saving: high efficiency, low energy consumption. The power utilization rate of LED light sources is as high as over 80%.
2. Environmental protection: There are no ultraviolet and infrared rays in the spectrum, there is neither heat nor radiation, small glare, and the waste can be recycled, there is no pollution, does not contain mercury elements, it is safe to touch, and the light quality is high. It is an environmentally friendly product with basically no radiation and a "green" light source.
3. Long life: Long life, generally up to tens of thousands or even hundreds of thousands of hours. Some people think that if future car lighting uses LED, there will be no need to replace lamps throughout the car's service life.
4. High brightness: The brightness of LED car lights can reach 3500 lumens.
5. Small size: Another advantage of small size is design. Small size means more design space, and the appearance will become richer and richer.
6. Good stability: LED has a simple structure, an internal bracket structure, and is sealed with transparent epoxy resin around it, with good earthquake resistance.
7. Fast response: When the LED lights are turned on, the response is instantaneous, taking only a few nanoseconds. Basically it can be ignored.
Disadvantages of LED car lights
1. High cost: Take the better-selling "GS LED car lights" and "UPS Apa xenon lights" on the market as examples. GSLED car lights are twice as expensive as APA xenon lights.
2. Heat dissipation: Since LED uses diodes to emit light, it is a cold light source. The hotter the bulb, the worse it will be. If the heat dissipation is not handled well, the light will easily decay, thus affecting the service life of the bulb.
3. Non-standardization: There are no relevant regulations for LED car lights, and the production requirements are not clearly standardized. As a result, there are now many manufacturers and product quality is uneven.
4. Light pattern design: Due to the difference between the light-emitting method and the xenon lamp, the light pattern needs to be readjusted, which is difficult for producers.
2. Advantages and disadvantages of xenon lamps
Xenon lamps are also called HID gas discharge headlights in the field of automotive lights. It uses high-pressure xenon gas wrapped in a quartz tube to replace the traditional tungsten wire, providing higher color temperature and more concentrated lighting. Because the xenon lamp uses high-voltage current to activate xenon gas to form a beam of arc light, it can continuously discharge and emit light between two electrodes.
Advantages of xenon car lights
1. Good color temperature: HID lights can produce light with a color temperature of 4000-12000, which is close to the color of midday sunlight, and is acceptable and comfortable to the human eye Highest.
2. High brightness: A 35w xenon lamp can produce 3500 lumens. It brings unprecedented driving comfort to car owners driving at night; it makes the driver's vision clearer and greatly reduces the chance of driving accidents.
3. Low power consumption: The power of HID is generally only 35 W, while the power of ordinary car lights is generally 55 W. More energy efficient than ordinary halogen lamps.
4. Long life: HID uses electrons to excite gas to emit light and does not have tungsten filaments, so it has a long life. A set of HID gas discharge lamps lasts about 3,000 hours.
5. High stability: Once the power supply system and battery fail, the ballast will automatically shut down and stop working.
6. High safety: Due to the characteristics of xenon lamps, when the xenon lamp fails, it will not go out instantly, but will gradually darken (or light up quickly), so that the driver can Gain time while driving in the dark and pull over urgently.
Disadvantages of xenon lamps
1. Necessary ballast: Xenon lamps must be used with a ballast. To light up the xenon lamp, a ballast is required to instantly increase the voltage to 12v. 32000v will do.
2. High installation difficulty: Xenon lamps are more difficult to install than LED lamps, requiring various matchings and sometimes component processing.
Summary: In the comparison between xenon lamps and LED lamps, I can’t tell which one is better. I can only say which one is more suitable for me. Choose according to each person's needs. But in the long run... >>
Question 9: What brand of car hernia lights is good? Xenon lamps are very bright. The brightness can reach 8000. The quality of the Philips brand is good. The product is guaranteed. However, it is not recommended that you replace the headlights. The replaced headlights are brighter than the original lights. However, the directionality of the light is extremely poor. Driving at night There is a certain danger. Generally, products have power usage ranges. As long as the limit is not exceeded, the circuit will not burn.
Price: 1,300 yuan
Question 10: Which brand of xenon lamp is good for the top ten cars? The xenon lamp brand is the first to introduce Philips HID xenon lamps. Currently, Philips xenon lamp products use anti-UV quartz glass, which can effectively protect the lamps. The product series include Diamond Vision, Crysta Vision, and Blue Warrior. Blue Vision), Vision Plus and Silver Vision. The second recommended top ten automotive xenon lamp brands are OSRAM xenon lamps, OSRAM XENARC? HID xenon lamp retrofit kits, existing products The scope includes modifications of H1, H4, H7 and HB4, with color temperatures of 4200K and 6000K. Through xenon discharge technology, we provide drivers with smarter, brighter and more durable lighting options for their journeys. The beam of HID xenon lamps is farther and wider than ordinary halogen lamps, thus greatly improving the lighting in front of the car, making the driver's field of vision wider and the journey safer. This product can be found in 4S stores, auto parts stores, car beauty shops, and car modification shops. The third recommended top ten car xenon lamp brand is Hella xenon lamp. Hella is a well-known international brand. In the test It shows considerable stability and brightness characteristics. It reaches 20% brightness in about 1 second after starting up. The power output and brightness stabilize after 28 seconds of powering on. After stabilization, the brightness reaches 3200-3400 lumens. Its brand and quality advantages are obvious. Here are three brands for your reference. You can choose according to the actual situation and preferences. Hope this helps.