Futian Treyvaud TB554 tractor is a small and medium horsepower tractor, and there is also TA554 tractor.
Lovo 554, with strong power, topography and dry land, can generally take 180 to 220 rotary tillers. It can adapt to all kinds of environmental operations, and it is a tractor for farmers' own use with high quantity. ?
From the end face of the thread, several thread heads are several threads. 2. From the same helix, there are several pitches on the same lead, and several pitches are several threads.
Extended data:
Attention should be paid during installation: the fork joint of square shaft and square shaft sleeve should be in the same plane. If it is not installed correctly, the universal joint will make noise, the vibration of the rotary tiller will increase and the parts will be damaged. After installing the universal joint, the safety pin should be inserted into the groove on the spline shaft and locked with the cotter pin.
When installing the rotary cultivator supporting the walking tractor, the tractor should lean forward, remove the traction frame and fix the rotary cultivator on the gearbox with five studs.
Pay attention to the alignment of the two locating pins on the two joint surfaces to ensure that the assembled gears mesh correctly. During installation, if the gear in the rotary tiller transmission box is butted with the gear in the gearbox, it is not allowed to strike hard. Before installation, you should turn the pulley to make the gears in the gearbox turn at an angle.
In addition, the thickness of the paper pad at the joint with the gearbox should be 0.45 ~ 0.55 mm Too thick or too thin will affect the meshing clearance of the meshing gear. When removing the rotary tiller, cover the joint surface of the gearbox with a protective cover to prevent sundries from falling into the box.
Baidu encyclopedia-rotary tiller