How to make up for the leak in the bathroom?

In daily life, I believe that many friends will feel very distressed if there is water leakage in the bathroom, and their normal home life will often be greatly affected, and sometimes they will even feel helpless. Sometimes it may be because the waterproof work is not done well during decoration, and sometimes it may be because of the quality problems of some tiles or other materials, which leads to water leakage in the bathroom. What should we do at this time? Don't worry, the following small series will share with you some ways to catch water leakage in the bathroom. Let's study together.

Method 1

If the waterproof layer leaks, remove the original tiles and clean up the base surface. After the cement mortar is mixed, the ground will be leveled to further waterproof. The height of the waterproof wall is controlled at about 30cm, which can better prevent the toilet from leaking.

Method 2

If the waterproof layer of the bathroom leaks, you don't need to plan tiles. You just need to re-waterproof the surface of the bathroom with a new type of penetrating waterproofing agent, so that the water will not enter the ground and flow directly from the waterway.

Method 3

If it is a problem of plumbing, and plumbing is underground, you need to consider planing tiles, but you don't have to redecorate the bathroom. For example, if the water inlet pipe leaks, it can be replaced with a clean water pipe instead of a leaking water pipe. If the sewer pipe leaks, we should also find the specific location of the leakage. According to the situation, it is determined that it is part of the plan to solve the problem, and it is not necessary to plan it all.

Method 4

The bathroom is humid and often surrounded by steam. When the toilet leaks, PVC gusset plates with good waterproof performance can be considered to replace the ceiling and be installed on the keel to cover the pipeline. When the bathroom leaks, the pressure on the ceiling is also huge, and it is also necessary to do a good job of moisture prevention of the ceiling.

Method 5

For the leakage of ground pipes and hot and cold water pipes, the floor tiles should be scraped flat first, and the joints of water pipes should be found and sealed. If the water pipe itself has cracks, it needs to be replaced. After the treatment, the water pipes should be buried again, the waterproof layer within the scope should be repaired, and the floor tiles should be restored.

Don't forget to do a waterproof test after the toilet leaks, seal the sewer pipe and floor drain, drain and record the water level. If the water level does not drop significantly after 24 hours, the problem of toilet leakage will be completely solved.

Many times, the leakage in the bathroom often has a great influence on the appearance and family life. However, before problems happen, it is often difficult for us to find out. Sometimes, even if there are some small situations, we can't concentrate on dealing with them because we think they are just small problems and nothing serious. When the problem of water leakage becomes more and more serious, it is hard for us to ignore it. As for some leak-trapping methods in toilets, Bian Xiao has already introduced many kinds of them. I believe it is possible for everyone to solve specific problems.