2. After boarding the first fish, because the fish buckle has been opened, the wheel can be separated from the wire rope, and the fish buckle can be taken off with one hand to directly buckle the fish, thus freeing one hand to hold the fish controller or catch the fish.
3. After hanging the fish, put the fish into the water, directly pull out the wire rope until the length is appropriate, and then take a fish buckle from the quick hook with one hand and open it, and pass through the hole on the wheel to make the fish wheel stuck and unable to rotate, and the length of the wire rope is fixed. Note a small detail here, that is, first open the pin of the fish buckle hanging on the wheel, so that when fishing the next fish, you don't have to hold the fish with both hands to open the pin.
4. Starting from the second fish, you only need to remove the opened fish buckle from the wheel, buckle the fish, hang the opened pin directly on the wire rope to buckle it, and then slide the fish into the water along the wire rope. Don't mention the fish that has been detained. Then take out the next hook and open the dead line hanging on the wheel.
5. move. Because the fish itself has a certain buoyancy, when it moves along the shore to fish or row, it will be easily dragged along. When it walks along the coast, it can be gently lifted by hand, without taking the fish out of the water at all, which is very relaxing and the fish can live longer.
6. If you need to leave the shore temporarily or there are obstacles on the shore that need to be bypassed, you can directly pick up the wire rope with your hands and wrap it around your hands for a few times to temporarily lift the fish away.