Who are the floor heating manufacturers? How is the quality? The German Ruhr floor heating brand is one of the most famous HVAC manufacturing brands in the world. Its products use first-class German technology. The installation of dry floor heating can replace traditional The backfill layer in the floor heating system means that during the floor heating construction process, the concrete backfill step is eliminated and replaced by the dry laying method of the floor heating module. Next, follow us to learn about the relevant content!
1. Ruhr dry floor heating uses superconducting thermal modules, which replace the traditional floor heating installation process with modules. The bottom layer of the dry floor heating module is made of high-density poly extruded board, which has good thermal insulation effect and strong pressure resistance. The heat is evenly dissipated through the nano thermal conductive coating on the surface of the module. Superconducting thermal nanoplates have good thermal insulation effects and can block the downward transfer of heat and reduce heat loss.
2. Ruhr’s dry floor heating module has national patent technology certification. Ruhr Comfort Home is the first floor heating brand to apply nanocarbon crystalline silicon material from European Space Agency’s aerospace technology to floor heating modules. . The laying and backfilling of traditional floor heating requires a floor height of 8-10 cm. The installation height of Ruer superconducting thin floor heating is only 3-5 cm.
3. The installation of traditional floor heating requires laying insulation layer, reflective layer, steel mesh, floor heating pipes and then backfilling the entire floor heating system. The laying process is cumbersome. After the floor heating coil is installed, the concrete needs to be filled within 48 hours. After the backfill is completed, it still needs to dry for three days or more before the decorative materials can be laid. The installation cycle of the entire floor heating system is long. Ruer second-generation superconducting thermal dry floor heating is easy to install. You only need to place the floor heating pipes into the pipe grooves of the module, making the installation more standardized. The use of dry modules does not require backfilling, and the decorative layer can be laid directly on the floor heating modules, resulting in a short construction period.
4. The Ruhr second-generation superconducting thermal dry module conducts heat 6 times faster than ordinary metal plates; the module's one-way heat conduction function ensures that heat is transferred upward and prevents heat loss; Heat dissipation replaces the wire heat dissipation of traditional floor heating; it reduces the heat conduction distance of the backfill layer, shortens the heat conduction distance, reduces heat loss, and truly realizes intelligent control of the floor heating system. Luer floor heating modules heat up three to four times faster than traditional floor heating.
5. Installing Luer dry floor heating modules can avoid the problems of mixing good and bad backfill materials and cutting corners in traditional floor heating construction; avoid stepping on and scratching the floor heating pipes during traditional floor heating construction. Unsafe factors; it can also prevent sharp-edged stones mixed in the filling layer from causing hard damage to the wall of the floor heating pipe when the floor heating pipe expands and contracts. The carbon crystal silicon nanometers on the surface of Luer dry floor heating modules contain more than 75% activated carbon, which can absorb benzene, formaldehyde and other harmful gases in the air, making the air safer.
The above is the editor’s detailed answer. I don’t know if everyone is satisfied with our introduction~.