1.
Burning oil can be repaired. To solve the problem of burning engine oil, we must first understand the reasons for burning engine oil. The reasons for burning oil are as follows. Due to domestic fuel quality and clean air filters,
Too dirty air filter will sharply prevent fresh air from entering the cylinder, resulting in excessive gas concentration, incomplete combustion, decreased power and excessive exhaust. Modern air filters generally use paper filter elements. Attention when cleaning: Do not use water or oil to clean, but use the method of beating and blowing. The beating method is to gently pat the end face of the filter element to make the dust fall off. Blow-clean method refers to blow-clean the inside of compressed air filter element, and the air pressure and force shall not exceed 0.3N/Pa.
2. Clean the oil filter
If the oil filter is blocked, it will hinder the flow of lubricating oil, resulting in poor engine lubrication, increased wear and even tile burning. Therefore, it should be cleaned or replaced regularly. If the climate is dry, it is usually replaced every 8000 kilometers. It should be shortened to 5 000km and replaced once.
Step 3 clean the battery
Modern cars generally use maintenance-free batteries. First, clean the top of the battery to avoid inter-electrode short circuit caused by electrolyte or other impurities. Secondly, clean the battery terminal to prevent the connector from generating oxide and causing poor contact. The vent hole should be clear to prevent the hand from bursting due to excessive pressure or high temperature in the battery.
Try to choose multi-grade oil. Multi-grade oil has the advantages of economy, long service life and high efficiency, and has a good protective effect on the engine. Based on the characteristics of multi-grade oil, premature blackening and oil pressure reduction may occur during use.