Dry the grease and moisture on the surface of the object, then use a lighter to melt the glue behind the hook, and press it firmly against the surface of the object. After five minutes, you can hang the item. In addition, the product package also comes with two spare glue. If you want to change the hook, first use a knife to cut against the back of the hook, and then use a lighter to melt the prepared glue on the back of the hook and stick it to whatever you want to stick. Location. First of all, the place to be glued must be a flat surface, and then wipe the surface of the object clean without dust or debris. If you want to glue it to glass or ceramic tiles, take a little egg white and spread it evenly on the surface of the sticky plate, and finally apply the glue firmly. Just press the disc in the position where you want to stick it. (Don't let the surface of the object be too dry when pasting, which will affect the effect of pasting. A moist spot is best). Removal method: First, choose a good quality adhesive hook. Various large supermarkets sell several types of suction cup adhesive hooks to choose from: traceless adhesive hooks, which have patented technology and are easier to identify.
It relies on physical leverage to enhance air discharge. You should be able to find it if you read the instructions carefully when purchasing. The air is removed by rotating the pressure cover. Adhesive hooks are attached with glue. Among them, the first three are reusable, so the price will be slightly more expensive, and the fourth is disposable, which will affect the appearance of the wall. Secondly, when installing, you can first wipe the wall with clean water (the wall is preferably tiles or mirrored, the smoother the better), wait until it is completely dry, and then install it. Tools: Knife, essential oil, rag, boiling water Steps: Use a dryer to blow hot air for a while, the adhesive will soften. Then use a wallpaper knife to carefully cut a small opening against the door, and then slowly lift it up. If there is any A little residue can be polished with sandpaper. In the first step, use a knife to cut off the adhesive hook from the top along the back of the hook that is closest to the adhesive. Be careful not to hurt your hands; in the second step, soak a corner of the rag with boiling water. , and then wipe vigorously. It must be boiling water, the effect is better. Be careful not to burn yourself; in the third step, apply the essential oil on a rag and use it to wipe away the remaining glue. Because Fengyoujing is slightly corrosive, the glue removal effect is obvious, and it is a good way to remove the remaining glue from sticky hooks.