Principle of pull-rod lifting clothes rack

Pull-rod lifting clothes racks can be divided into two categories: hand-operated clothes racks and electric clothes racks, which are generally installed on balconies and hung by wire ropes. When drying clothes, it is very convenient to lower the drying rod by hand or electric method, and then raise the drying rod after drying clothes. The lifting clothes rack is driven by the hand crank to pull the steel wire through the corner device and the top seat, so that it can be lifted or lowered. The hand crank has a self-locking function (mainly through the tightening or contraction of the built-in spring to generate friction), which can automatically lock the drying rod at any height.

first, the top seat

is installed on the ceiling of the balcony, so that the steel wire rope can be vertically connected with the drying rod through the internal pulley and support the installation of all weights. The top seat is not only used for this purpose, but various manufacturers stop designing the shape of the top seat, making it a decorative product that can decorate the ceiling.

second, the hand crank

the hand crank is the heart of the clothes rack and the most pivotal accessory, because the hand crank is the most complicated and easily broken of all accessories. The function of the hand crank is to drive the drying rod to rise and fall through the wire rope, which is the part with the most movement and friction. Therefore, it is not damaged casually. However, at present, various manufacturers are gradually improving the hand crank. The exception is that Guangdong manufacturers pay more attention to the hand crank, and one manufacturer has made a hand crank that has promised to be guaranteed for 5 years.

Third, the steel wire rope

The steel wire rope is divided into two parts, one part is connected with the hand crank, and the steel wire rope can be rolled in and pulled out of the hand crank by twisting the handle, which belongs to the hand crank. The other department is a wire rope with one end connected to the drying rod and the other end connected to the hand crank. The function of steel wire rope is to drive the drying rod to rise and fall. At present, the steel wire rope of most clothes hangers is made of 22# stainless steel wire, and a few very high-grade ones are made of 34# stainless steel wire.

IV. Clothes hangers

A set of clothes hangers will be equipped with 12 ~ 18 clothes hangers, which are usually made of plastic clothes hangers or wooden clothes hangers. At present, some high-end products use aluminum alloy clothes hangers, which are extremely luxurious.

V. Air drying poles

Usually, two air drying poles are equipped. At first, stainless steel pipes were used. At present, most of them are made of aluminum pipes with different shapes. Because the aluminum surface can be treated in a variety of ways, it appears.

VI. The steering gear

is installed on the wall, so that the wire rope can be installed vertically to the hand crank through the internal pulley.