It is especially suitable for measuring belt tension of long-span synchronous belt with vibration frequency below 30HZ. It can easily measure the frequency below 10HZ, so it is very suitable for belt tension measurement of 5 meters and above. If the probe is fixed, it can measure the frequency of 4HZ.
The sensor head can irradiate the flat side or toothed side of the belt at a distance of 50 mm or more, and the sensor is not affected by the irradiation angle. And because it is laser-type, it is completely unaffected by background noise.
Recommended for tension measurement of low-frequency long belts.
Measuring range: 10-300 Hz
Type 4: Belt Tension Gauge
Parameters:
30-600 Hz
Clavis Company of the United Kingdom obtained the patent of measuring sensor.
160 hour battery life
Instrument calibration table
Replaceable measuring head, universal 3 measuring head
This instrument is a universal belt tensiometer, especially suitable for measuring the belt tension of automobile engines, such as toothed synchronous belt and V belt.
Type 5: Belt Tension Gauge
Frequency range: 10.0 Hz to 600 Hz, covering all ranges of belt tension.
The display screen can show the unit of kilogram force.
The kit includes: common type 3 probe, charger, packing box, calibration table and calibration certificate.
13 SR model (belt tensiometer for harsh environment)
Available temperature range: -40 to +80 degrees Celsius.
It can be used in underwater 15 meters, and the instrument can be used in almost all kinds of environments. The shell is completely made of aluminum blank, and the internal electronic components are completely isolated from the outside world by super rubber seal.
14 model: belt tensiometer
Frequency range: 30-600 Hz.
15 model: the measured values can be recorded and stored, and the stored values can be displayed or transmitted to the computer.