How to install snap-in silicone hose? Is the installation method the same as the open silicone hose?

Snap-on silicone hose is easy to install and disassemble on site, which can greatly shorten the maintenance power outage time and overcome the shortcomings of long manual winding time and long power outage time. No hot work is required during installation and disassembly, which is softer and more resistant to bending than plastic open pipes. The installation and disassembly operations are simple and convenient, and the operators do not need professional training, thus overcoming the trouble of starting the fire certificate when winding the packaging tape and the problem of long-term power failure caused by long winding time.

Snap-in silicone insulation sheath has novel design, long service life of plastic open tube and covering tape, which can reach more than 20-30 years, good aging resistance, corrosion resistance, corona resistance, high and low temperature resistance, excellent mechanical properties and electrical insulation, low density, good flame retardancy, and no halogen and heavy metals. It is an upgraded product of covering tape, plastic open tube and heat shrinkable material. The successful application of this material ensures the safe operation of electrical equipment, especially the ceramic refractory type will not cause fire under overload and high temperature.

1. Cut the pipe according to the length of the line in advance. 2. Power failure occurred in some construction lines.

3. Coat the inner wall of the pipe with glue provided with the goods in advance. 4. Install the pipeline on the cable. Please see the schematic diagram below.

5. Fix it with attached accessories every about 1 m.. 6. The parts that need to be protected can be constructed in sections according to the above steps. Please refer to the complete reference drawings below.