Gently take out the earphone cord plug installed in the bracket slot by hand and insert it into the earphone hole of the mobile phone, then you can directly open the camera mode of the mobile phone and press the camera button of the camera assistant to take photos.
First, bend the mobile phone bracket to a certain extent, then hold the other end of the tail of the telescopic rod by hand, and connect the head to a hard object, so that the telescopic rod can gradually shrink together.
other
There are two kinds of selfie sticks bought now, one is controlled by Bluetooth and the other is connected. Which one to use has little to do with the model of the mobile phone. The two methods of use are as follows:
First, Bluetooth control.
Bluetooth control, as long as you open the Bluetooth settings in the taskbar of your mobile phone, the selfie stick will be automatically connected. Bluetooth on
Second, lines are linked.
As long as the wires are well connected and contacted, it is no problem to follow the instructions of the selfie stick.
The problem that both selfie sticks should pay attention to is that the mobile phone must be fixed and contacted well to take a good photo.
develop
Brief introduction of utensils
The selfie stick is a popular selfie artifact recently. From 20cm to 120cm, it can be expanded and contracted at will. The user only needs to fix the mobile phone or stupid camera on the telescopic pole, and can take selfies from multiple angles through the remote control.
selfie stick
The technical design of the selfie stick is not complicated. It mainly consists of a selfie stick, a fixed bracket, a Bluetooth remote control camera or a bottom button. The fixed bracket can hold mobile phones, cameras and even tablets. The freely adjustable telescopic rod brings a wider shooting angle, and the operation can be controlled by the Bluetooth button at the bottom of the rod.
The width of the mobile phone where the selfie stick can be placed is between 56 mm and 86 mm, and most mobile phones on the market can be fixed. When using, you don't need to download the APP, turn on Bluetooth for pairing, and the bottom of the stick is equipped with mircoUSB interface, which can be fully charged in about half an hour to 1 hour, and the longest standby time is about 4 days.
The origin of artifacts
The origin of the selfie stick is very early, long before the mobile phone has a camera.
In 1988, Donald N. Horn and Bern Levy filed a patent application for a portable camera/display support rod. This patent describes a long pole of a portable camera, which can shoot from above, and the director can see the picture on the lower display.
In 2005, the Canadian inventor Fromm invented a device that can support a camera and applied for a patent (U.S. Patent # 7,684,694). Wayne G. Fromm submitted the device and usage of supporting cameras in 2005.
There is also a saying that the origin of the selfie stick seems to come from the extreme sports circle. This kind of professional supplies was quickly applied to people's daily life. The selfie stick will never return to the era when it was only used for skydiving. Ordinary people can also upload advanced selfies to record their lives. In most cases, the selfie stick is mainly to put more people into the photo frame.