Brief introduction of condensate cleaning machine:
In the past, most condensers were dredged manually and stabbed from bottom to top. In recent years, high-pressure water jet has been used for dredging at home and abroad. Due to the small space in the air preheater, harsh environment and high labor intensity, there is no special dredging tool, which has caused troubles to enterprises.
The latest patented product independently developed by German Rosemburg Company is a new product specially designed for dredging condenser in power plant. Its working principle is that the power system transmits power to the special drilling and washing cutter head through the transmission flexible shaft, and the cutter head is in a state of small vibration and low rotation speed, so that hard impurities such as cement caking, refractory brick caking and coking in the preheater tube can be smoothly carried out in a very short time (1-2 minutes).
The drilling and washing tool bit is made of special alloy steel material through special technology, so no matter how hard the blockage is, it can be turned into crumbs to float or flow away with water. The use of this product has solved the problem that the condenser is seriously blocked, and it is difficult to dredge it by using various foreign water jet cleaning equipment, so that a large number of condensers that are about to be scrapped are put into use again, saving immeasurable economic losses for enterprises.
The purpose of condenser cleaning machine
The patented new product developed for cleaning the blockage problem of condenser overcomes the shortcomings of manual cleaning, rubber ball cleaning and chemical cleaning, and has good cleaning effect and high efficiency. This product has been widely used in the national power system and has been listed as a key promotion product by the state.
Condenser washer operation
1, which is safe and reliable to use: this machine is equipped with 36V starter, safe voltage and operating lights. The starter can be put into the furnace with the staff, and the main engine can be turned off at any time as needed. And the host device has a good automatic protection system. If there are impurities such as covered electrode tips and iron wires in the pipe, the drill bit will be stuck, the clutch can be automatically disengaged and the power supply will be automatically turned off, the staff will pull out the hose to remove the impurities on the flexible shaft or drill bit, and then restart the main engine to continue dredging and cleaning.
2. Working principle of the condenser cleaning machine: the power system drives the flexible shaft, which transmits the driving force to the alloy drill bit that sprays water. It is in a state of high-frequency vibration and rotation, and can smoothly dredge impurities such as cement caking, anti-caking and coking in the preheater tube in a short time (1-2 minutes). The drill bit of this machine is made of special alloy material through special technology. No matter how hard the blockage is, it can turn into broken foam and go out with Shui Piao.
3. The air preheater can be dredged by only one person, and the labor intensity is low. If the blockage is not too serious, take the pipe length of 6m as an example, 4-5 pipes can be dredged every minute. But also thoroughly dredge, and the product is time-saving, labor-saving and money-saving. Moreover, the construction period is short, which reduces the maintenance time, generates electricity in advance, maximizes the efficiency of the air preheater and increases the economic benefits of the enterprise.
Features of condenser cleaner:
1, unique and concise design concept.
2. Equipped with hanging basket cleaning fixture, simple combination can complete the cleaning of condensers with different sizes.
3. In the case of achieving the same function, the area occupied by the machine is very small.
4. The carrier can be effectively cleaned in all directions by heating and bubbling.
5, environmental protection and safety, less contact of operators with cleaning agents, less impact on human health, suitable for water-based cleaning agents.
9. Accurate temperature control treatment ensures the effective cleaning of the solvent, and only one person needs to operate it.
Precautions for safe operation:
1. Before operation, check whether the machine is abnormal, or stop using it.
2. In order to ensure safe operation, good grounding measures must be used to connect the grounding wire.
3. After the pipeline is blocked, it is easy to cause water in the workplace. When cleaning the pipeline in a wet environment with stagnant water, corresponding safety protection measures should be taken, such as using a leakage protector and placing the main engine in a dry place without stagnant water. Operators wear insulating gloves, shoes or stand on insulating mats.
4. Please use fuses with rated voltage and standard capacity, and do not use substitutes such as metal wires.
5. Don't pull the power cord when moving the machine or unplugging it.
6, in a narrow place or special environment (such as boiler room, pipeline, wet zone, etc.). ) There should be someone to supervise you when you are working.
7, when using and wiping the machine, should prevent the host internal water. The machine that accidentally enters the water must be dried before it can be used.
8, it is forbidden to use fault machine operation. It should be dry and airy.
9, after the operation, should first cut off the power supply, and then do a good job of site cleaning and machine maintenance.
10, note: non-professionals are not allowed to disassemble and repair this product without authorization. Please check the instructions for use of the product. If the product is damaged due to human negligence or failure to follow the correct use method, it is not within the warranty scope of our company.
Editor's summary: The relevant information about what is the condenser cleaning agent and what is the function of the condenser cleaning agent is introduced here for everyone. I hope this article is helpful to everyone. If you still don't understand, please leave me a message below and we will answer you as soon as possible.
Water should be prevented from entering the main engine. The machine that accidentally enters the water must be dried before it can be used. 8, it is forbidden to use fault machine operation. It should be dry and airy.
9, after the operation, should first cut off the power supply, and then do a good job of site cleaning and machine maintenance.
10, note: non-professionals are not allowed to disassemble and repair this product without authorization. Please check the instructions for use of the product. If the product is damaged due to human negligence or failure to follow the correct use method, it is not within the warranty scope of our company.
Editor's summary: The relevant information about what is the condenser cleaning agent and what is the function of the condenser cleaning agent is introduced here for everyone. I hope this article is helpful to everyone. If you still don't understand, please leave me a message below and we will answer you as soon as possible.