Check the integrity of the pump body itself before installation: mainly check the appearance of the pump body and components, and check whether there are any abnormalities such as deformation and bending. If it is damaged during transportation, contact the manufacturer in time. At the same time, we should also pay attention to check whether all accessories are complete.
Choose the correct installation position: the magnetic pump should be installed horizontally, not vertically. The installation position should not be too high, and the environment should be kept clean and tidy, not close to the wall, and a certain heat dissipation space should be left.
Independent pipe support: During installation, it is forbidden for the pipe weight to directly act on the pump body, and the pipe needs a separate support. In the pipeline layout, we should try to avoid too long and too many bends and avoid unnecessary energy loss.
Motor rotation direction: Before starting the motor, it must be checked whether the motor rotation direction is consistent with the steering sign of the magnetic pump to ensure the normal operation of the motor.
Pump inlet pipe: If the suction level is higher than the pump shaft, just open the suction pipe valve before starting. If the suction level is lower than the pump shaft, the pipeline should be equipped with a bottom valve.
In the installation process, attention should be paid to closing the discharge valve and suction pipe valve in time to avoid liquid backflow.
The above are some points that should be paid attention to when installing the magnetic pump. Please read it carefully and follow the following steps.