At present, Alipay supports water and electricity payment in more areas. At the same time, support the payment of other people's water, electricity and coal fees. Free use. Please go to Alipay website-Application Center-Payment of water, electricity and coal-Select provinces, cities and charging units (supported cities and operators will be displayed on the page)-and enter the cashier to confirm the payment.
What should I pay attention to when recharging ic card gas meter?
How to insert the gas meter card?
Plug-in gas meters belong to prepaid gas meters, which means that you need to go to the business hall to recharge your IC card first, then take the card home and insert the newly charged IC card into your gas meter, thus completing the recharging process of the gas meter, so that the gas meter will have gas. You can check your gas meter, which usually shows the remaining gas. Then you can insert the fuel card in the following way.
First, insert the gas card into the controller and insert the card according to the instructions of the gas meter. When the IC card is inserted into the controller, the display screen will show "Read Card". At this time, the controller is reading the gas in the IC card into the instrument, and it is recharging. When you hear a beep, it means that the card has been read. At this time, the valve is in the open state, and the LCD screen displays the following information in turn: card reading deposit-recent IC reading. Then pull out the card and recharge successfully. Of course, everyone should pay attention to the fact that it is forbidden to pull out the IC card when reading the card, otherwise the following problems may be caused: the IC card is damaged or the gas purchased in the IC card is lost. If you don't understand, see if the card is inserted backwards, turn it over and insert it again.
When the residual gas in your gas meter is 0, a valve in the meter will be closed and you can't use gas. If gas can still be used at this time, it means that the internal valve is broken and needs to be repaired. If the electronic part of the plug-in gas meter is damaged or the valve is damaged, the gas company will take the mechanical counter as the standard, so you still have to pay the fee.
Matters needing attention in recharging ic card gas meter.
1. It is forbidden to pull out the IC card when reading the card, otherwise the following problems may be caused: the IC card is damaged or the gas in the IC card is lost.
2. If you find that you can't read the card, check whether the IC card is inserted backwards.
3. When gas is used, the liquid crystal display screen shows the remaining gas in the ammeter, and the display value decreases with time.
4. When the remaining gas volume in the gas meter is low to the alarm gas volume set by the gas company, the gas meter will give an alarm to inform the user to buy gas, and the LCD screen will display an alarm symbol. If it continues to be used until the residual gas in the gas meter is zero, the controller will automatically close the gas meter valve. Only when the IC card with gas capacity is plugged in to charge the gas meter can the gas meter valve be opened and gas supply be resumed.
5. Before resuming gas supply, please make sure that the valve in gas appliance is closed! ~ If it is not used for a long time, the valve will automatically close. Please open the reverse card. If you still encounter problems, please report to the gas company.
6. Charge adjustment: If the IC card gas meter fails and the consumption is not recorded, the customer must pay the fee used during the failure for whatever reason. According to the reading of the mechanical meter x gas price or the average consumption time x gas price the day before the meter fails (selected by the gas company), the fee payable by the user shall be deducted from the paid gas fee.