Use and maintenance of refrigerator filter

Filters are generally installed in the direct liquid pipeline at the outlet of condenser and the inlet of capillary, which can achieve good system impurity filtering effect and prevent impurities from entering the compressor of refrigerator.

Closed organizational structure

Most of the filters used in refrigerators are closed and cylindrical, with a diameter of about 16 mm and a length of about100 ~150 mm. One end of the filter will be equipped with a corresponding copper wire filter screen, and the other end will also be equipped with a filter rod, and both ends will be filled with corresponding desiccant, which can not only achieve good filtering performance, but also effectively remove part of the refrigerant.

Regular replacement

In practical work, the adsorption capacity of molecular sieve will decrease after being used for a period of time. Users also need regular replacement or maintenance. Users need to know the specific location of the refrigerator filter. First, they need to close the water inlet valve of the refrigerator and pull out the filter element of the refrigerator. At this time, you can directly remove the filter screen.

Replacement and maintenance

In the process of pulling out the filter, it is very necessary for the user to ensure the horizontal state. After replacement and maintenance, a new filter element should be added and inserted into the filter box, and the water inlet valve should be reopened, so that the refrigerator can be restored to use.