Chapter 1: Job Responsibilities of Furniture Polisher
1. Job Responsibilities of Polisher
1. Comply with the company’s rules and regulations and the department’s regulations Management regulations, responsible for the quality of the products produced.
2. Comply with the company’s code of conduct for production safety and other safety technical operating procedures, as well as various safety production rules and regulations.
3. Execute the work plan and complete or exceed production tasks with high quality, efficiency and low consumption.
4. Clarify the tasks, stick to the position, ensure the completion of production tasks on time, and be responsible for the polishing quality.
5. Wear masks, eye protection and other labor protection products when working, and be proficient in the process requirements of the required grinding parts.
6. Obey leadership, follow instructions, do your job well, and complete production tasks conscientiously. Production is carried out according to design drawings, process documents and technical standards, and self-inspection and mutual inspection are performed during the processing.
7. Carefully check the work site and surrounding working environment, and eliminate potential safety hazards in a timely manner if found.
8. Firmly establish the concept of quality first and operate carefully. Strictly implement the "three inspections" system: self-inspection as the mainstay, mutual inspection as the supplement, and submission to special inspection after confirmation.
9. If the polishing quality is not up to standard and the repair process is to be repaired, the repair process must be strictly followed.
10. Equipment, tooling, and measuring tools must be carefully maintained to keep them in good condition. Do a good job in on-site management, safe production and civilized production, do not throw away polishing discs, and pay attention to saving polishing discs.
11. Implement quality and team management standards.
12. Remove all burrs generated after turning, milling, drilling, grinding, and drawing processes according to the requirements of the process card. The tools are motorized grinding wheels, files, and grinding heads.
13. Be responsible for the original shape, roughness and removal amount of the product.
2. Polisher job responsibilities
1. Consciously abide by the company's rules and regulations
2. Maintain the company's image and interests;
2. Strictly abide by the confidentiality agreement signed with the company;
4. Strictly implement the safety operating procedures for grinders;
5. Wear masks, glasses and other labor protection when performing operations products, and be proficient in the process requirements of the required grinding parts;
6. If missing welds, missing welds, steel cracks, etc. are found during the grinding process, they must be reported to the superior in time;
7. Safety operating procedures for angle grinders
1) Before use, check whether the wires, plugs, and sockets are insulated and intact;
2) To use the grinder correctly, you must first wear it Protective gloves and glasses; when turning on the machine, your hands must be held firmly to allow sparks to splash forward; pay attention to check whether there are any defects or looseness;
3) It is strictly forbidden to use oily or wet hands when working on the polisher work to avoid electric shock and injury;
4) It is strictly prohibited to use it in fire prevention areas. If necessary, it must be approved by the security department;
5) It is not allowed to disassemble the polisher without permission , pay attention to daily maintenance and use management;
6) The power cord of the polisher must not be reconnected without permission, and the power cord of the polisher must not be longer than 5 meters;
7) Protection of the polisher Do not use the protective cover if it is broken or damaged; dismantling the protective cover for polishing is prohibited;
8) Conduct insulation telemetry regularly;
9) After use, a dedicated person shall be responsible for safekeeping;
p>
10) When the angle grinder is temporarily placed after being powered on, be sure to keep the grinding disc upward to prevent it from jumping up when it is suddenly started; the power should be turned off when not in use for a long time or taking a break;
8. Safety of the grinder Operation:
1) Non-trained and qualified maintenance personnel are strictly prohibited from operating the grinder;
2) Before starting the grinder, first check whether the grinding wheel cover is complete and firm, and whether the grinding wheel is damaged. ; Do not use the grinding wheel if it has cracks; it can be opened only after inspection and can be used only after the speed is stable;
3) The gap between the tool rest and the grinding wheel should not exceed 5 mm. After the grinding wheel is worn, it should be adjusted in time; The workpiece is not allowed to be ground on the side of the grinding wheel;
4) Do not work on a vibrating grinding wheel;
5) The workpiece must be held firmly during grinding, and the person must stand on the side of the equipment Work on the side to avoid the rotating surface of the grinding wheel;
6) The workpiece should be clamped firmly during grinding, and the workpiece should slowly contact the grinding wheel; the speed should not be too fast or the force should be too strong, and it should be ground evenly;
7) When the grinding wheel appears elliptical or uneven, the wheel should be repaired or replaced in time; if the grinding wheel jumps or runs unevenly during grinding, the grinding wheel should be repaired in time.
8) When installing the grinding wheel, asbestos pads must be added on both sides to tighten it firmly;
9) When grinding objects, they must be clamped with pliers and cannot be ground directly by hand;
10) Workpieces that are too long or too large are not allowed to be ground on the grinding wheel, and grinding of the workpiece is not allowed with one hand;
11) Protective glasses should be worn when grinding with the grinding wheel. Wear gloves with the grinding wheel;
12) After using the grinder, the power should be turned off immediately;
3. Responsibilities of the grinder
Responsibility 1: Preparation before grinding
1. Check whether the grinder is normal, including plugs, switches, protective covers, and grinding discs
2. Wear protective glasses, masks, and protective gear
Responsibilities Two: Polish welding parts
1. Remove the spatter left by welding
2. Polish the excess slag and scars left by welding
Responsibility Three: Self-inspection and cleaning
1. Check for leakage and areas that need polishing
2. If the inspector fails to pass the inspection, make rectifications, clean the site, and put away the tools
4. Polisher job responsibilities
1. Strictly implement the polisher safety production system.
2. When working, you must wear masks, glasses and other labor protection products, and be proficient in the process requirements of the required grinding parts;
3. Missing welds are found during the grinding process. Missing welds, steel cracks, etc. must be reported to superiors in time for prompt processing;
4. Surface textures must be polished. The textures must be clear, straight, and have an even transition. There must be no obvious visual differences such as random lines or layering. .
5. The corner transition should be smooth and straight, without unevenness or holes, excessive polishing, or cracks.
6. Complete other tasks assigned by the leader.
5. Polisher job responsibilities
1. In accordance with the requirements of the workshop supervisor, complete production tasks on time and in quantity, and complete the production tasks of the day and month;
2. The process requires production operations and polishing of welding slag, spatter, rust removal, iron oxide and other debris on the drilling tools.
3. Obey the leadership arrangements and complete the polishing work on time; Part 2: Polisher Job Responsibilities
Polisher Job Responsibilities
1. Observe the company’s various policies We are responsible for the quality of the products produced in accordance with the rules and regulations and various management regulations of this department.
2. Comply with the company’s code of conduct for safe production and other safety technical operating procedures, as well as various safety production rules and regulations.
3. Execute the work plan and complete or exceed production tasks with high quality, efficiency and low consumption.
4. Clarify the tasks, stick to the position, ensure the completion of production tasks on time, and be responsible for the polishing quality.
5. Wear masks, eye protection and other labor protection products when working, and be proficient in the process requirements of the required grinding parts.
6. Obey leadership, follow instructions, do your job well, and complete production tasks conscientiously. Production is carried out according to design drawings, process documents and technical standards, and self-inspection and mutual inspection are performed during the processing.
7. Carefully check the work site and surrounding working environment, and eliminate potential safety hazards in a timely manner if found.
8. Firmly establish the concept of quality first and operate carefully. Strictly implement the "three inspections" system: self-inspection as the mainstay, mutual inspection as the supplement, and submission to special inspection after confirmation.
9. If the polishing quality is not up to standard and the repair process is to be repaired, the repair process must be strictly followed.
10. Equipment, tooling, and measuring tools must be carefully maintained to keep them in good condition. Do a good job in on-site management, safe production and civilized production, do not throw away polishing discs, and pay attention to saving polishing discs.
11. Implement quality and team management standards.
12. Remove all burrs generated after turning, milling, drilling, grinding, and drawing processes according to the requirements of the process card. The tools are motorized grinding wheels, files, and grinding heads.
13. Be responsible for the original shape, roughness and removal amount of the product. Chapter Three: Polisher Job Responsibilities
Polisher Job Responsibilities
1. Strictly implement the polisher safety production system.
2. Wear masks, glasses and other labor protection products when performing operations, and be proficient in the process requirements of the required grinding parts;
3. Missing welds are found during the grinding process. Missing welds, steel cracks, etc. must be reported to superiors and dealt with promptly;
5. Surface textures should be polished. The textures should be clear, straight, and evenly transitioned. There should be no obvious visual differences such as random lines or layering. .
6. The corner transition should be smooth and straight, without unevenness or holes, excessive polishing, or cracks.
7. Complete other tasks assigned by the leader.