1, the pressure reducing valve reflects that the tap water pressure is too high or unstable.
2. After the electric water heater is used for a period of time, there is water rust in the inner container, and there will be sound when working. This possibility will not be great! And this voice is easy to recognize!
If it is the first case, you can apply for maintenance and explain the situation. Wait for the service staff to come to the door and ask him to measure the water pressure. If the water pressure is too high, consider installing a pressure stabilizing valve!
Smith electric water heater adopts patented Jingui special protection heating rod: long-term efficient heating, durability and energy saving; Jingui coating is tightly protected, durable and anti-scaling. Low fouling ensures that the heating rod maintains high heat transfer efficiency and runs efficiently for a long time.
Extended data:
Matters needing attention in installation of Smith water heater
1. The wall-mounted electric water heater cannot be installed outdoors. Please install it on the load-bearing wall.
2. The right side of the water heater should be at least 30cm away from the wall. ?
3. If the water heater is hidden or semi-hidden in the ceiling, the ceiling cover on the right side of the water heater should be movable to facilitate future maintenance.
4. In order to install beautifully, please embed the cable controller bottom box and conduit before installing the cable remote controller product.
5, the pressure reducing valve must be installed with a diversion pipe, and lead to the floor drain or drain.
Baidu encyclopedia-Smith electric water heater