How to use cement board machine? Which manufacturer is better?

There are many construction machinery and equipment in our life, and the cement foot pad machine is a common construction machinery and equipment, which is mainly used for cutting cement. Now many cement projects will need to use cement pad machine, cement pad machine is more practical. Pay attention to maintenance when using cement pad machine, because cement pad machine is a kind of mechanical equipment prone to failure. Next, let's take a look at the use of the cement pad machine and get to know its manufacturer.

Use method of cement padding machine

1, be sure to carefully adjust the gap of the padding machine.

The gap of this kind of adjusting padding machine includes not only the moving plane of the press head and the die core, the press head and the skip, but also the distance between the die frame and the wire board, and the relative movement shall not interfere or collide;

2. When installing or replacing the old and new molds, it is necessary to avoid collisions and bumps, assemble them in a civilized manner, and pay more attention to protecting the molds;

3, cement pad machine daily cleaning mold, using air compressor, soft tools to remove concrete residue, it is forbidden to gravity tapping, pry the mold;

4. The replaced mold should be cleaned, oiled, rustproof, dried and leveled. Bearing bears all the load of the machine, so good lubrication has a great relationship with the service life of the bearing, which directly affects the service life and operation rate of the machine;

5, pay attention to check the wear degree of parts, pay attention to replace worn parts at any time;

6. Put the underframe plane of the movable device, and remove dust and other things to prevent the movable bearing from moving on the underframe when the machine encounters materials that are not easy to break;

7, bearing oil temperature rise, should immediately stop to check the reason to eliminate.

Matters needing attention

Only by correctly mastering the use method of the dunnage machine can the dunnage machine run normally in the production process.

manufacturer

Henan Netac Machinery Equipment Manufacturing Co., Ltd. is a joint-stock company integrating development, production and sales. The main products are metallurgical mineral processing equipment, new building materials equipment, sand making and so on. The company is located in Zhengzhou, the most important city in China, with a unique geographical position. Since its establishment, Henan Netac Machinery Equipment Co., Ltd. has always put innovation in an important position and devoted itself to producing advanced modern management systems. After decades of precipitation, the company has gathered a large number of scientific and technological elites. Netac has been constantly innovating production, using computer information, managing production technology through microcomputer, and using CAD and CAPP technology in product development technology.

The above is the use method and manufacturer introduction of cement pad machine. Cement board machine is a kind of equipment for producing cement board and concrete board, which is used in high-rise buildings. The existence of cement board machine can protect the environment and make the surrounding environment better. In addition, the equipment can produce cement washers with very consistent specifications and sizes. The price of cement pad machine is generally around 1000 yuan, which is not a large mechanical equipment, but it is very practical and common.