Screen windows are widely used in our homes and some factories. They not only prevent mosquitoes and dust, but also have good ventilation performance. As for the installation of screen windows, it is not easy. The following is mainly about the installation of screen windows.
Installation process of screen window: double open and buckle the vertical frames on both sides of the screen fan. First place the upper rack, lift it up with both hands, and then deliberately bend the middle of the fan body slightly. Push the bottom screen fan outward and push and pull the screen into the rails. The specific steps are as follows:
1. First fix the upper end, grab the middle part and pull it out hard. At the same time, with your other hand or the help of another person, push the lower end in.
2. Insert the screen window obliquely into the upper part, and then forcefully enter the slot below.
3. When installing, you can put the top on first and then push it up. Once you push it to the bottom, it should land on the lower slider. If you can't push it down, you can hold the middle of the screen fan with your other hand and pull it out. That way, if it gets bent, you can push it down.
4. First put the lower part into the slot, press the upper part forward with your head, pull the bow head back from the left and right sides, and push forward with force.
5. Or in a place with the largest space at a high place, go up first, one hand on one side, in the middle, and pull inward. Don't be afraid of its elasticity, and push inward on the bottom with one hand.
Installation details to know: One pulley is installed on the inside under the sliding screen sash, one on the left and one on the right. The pulley means it's below and the sash is above, without the pulley. If the direction is reversed, installation will not work.
The original aluminum alloy and plastic steel doors and windows of the push-pull screen window have been used for more than 2 years, and the middle position of the main frame is easily deformed.
Sliding mesh windows should be installed from the left or right frame of the frame, which can bypass deformed frames.
The deformation of the sliding screen sash can be corrected by checking the corners for cracks and temporarily tightening them with bevel screws.
The above are some answers to the question of how to install screen windows. I hope it will be helpful to everyone.