What is a hydroelectric slotting machine?
According to different construction requirements, the hydro-slotting machine can open slots with different angles, widths and depths at one time without other auxiliary tools. Grooving groove can be completed as required, which is beautiful and practical and will not damage the wall surface. No dust is generated during use, no dust pollution, and the labor intensity is reduced, which is a leap compared with the traditional wall grooving tool. It is an ideal slotting tool for changing the open wires of old houses into dark wires, decorating new houses, telephone wires, network wires, water wires and so on.
Advantages and characteristics of hydropower slotting machine
1, exclusive patent of hydropower slotting machine: the first in China, filling the market gap, with broad demand and unique absolute market advantages;
2. Hydroelectric slotting machine has a wide range of uses: it is suitable for walls with different materials, such as red bricks, sand bricks, hollow bricks, aerated bricks, cement facing walls and wall columns.
3. Simple operation of the hydro-slotting machine: simple operation, easy operation by one person and easy movement; When resting in the middle, just turn off the power supply, and the fuselage can still be safely hung on the wall, without disassembly and assembly, without falling off, which is more worry-free and labor-saving;
4. One-time molding: quickly and automatically slotting for one-time molding, without any auxiliary tools and secondary procedures, and the slotting depth can be controlled at will;
5. Free rotation: different angles can be adjusted, and the appearance is beautiful. According to the required lines, the slot can be rotated at 45 degrees, 180 degrees and 360 degrees, which is convenient to use;
6. Efficiency ratio: slotting is completed in one step, and compared with the traditional slotting method, the efficiency ratio is 50: 1, which greatly reduces the construction costs such as manpower and time;
7. Wear-resistant tools: high-strength alloy steel cutter head, which can be polished and used for more than 40 times. The cutting cost is only 1-3 cents/meter, and the disassembly is simple;
8. Health and environmental protection: the cutting dust is granular, does not raise dust at low speed, and has little dust when slotting, thus reducing pollution, minimizing the harm of dust to construction and installation personnel, and more embodying humanistic care;
9. Easy to use: the structure is simple and practical, and it can be disassembled, polished and maintained without professionals;
Operating procedure of hydropower slotting machine
1) Before starting the machine tool, it is necessary to carefully check whether the tools, nuts and screws of all parts are firm, and tighten them in time if they are loose;
2) Pay attention to the cutting direction when installing the tool, and don't reverse it;
3) the main knife rotates clockwise;
4) Before grooving, confirm whether the pneumatic device is turned on, whether the workpiece is pressed on the movable push table and pressed against the positioning plate, and keep your hands away from the knife edge;
5) When the machine tool breaks down, it should immediately cut off the power supply and stop running, and assign special personnel to carry out maintenance and adjustment. It is not allowed to run the machine tool in spite of illness;
6) Before processing materials, check whether there are nails, sand cracks, etc. On tools, prevent tool joints from flying out and hurting people;
7) When cleaning and lubricating the machine tool, as well as disassembling the saw blade and cleaning the chips, the power supply of the machine tool must be cut off.
8) The machine tool shall be operated, adjusted and maintained by special personnel, and personnel unfamiliar with the machine tool shall not use it;
9) Workers should wear earplugs, goggles and other labor protection articles when operating.
10) the maintenance of the machine is carried out according to the equipment operation and maintenance system, and we have a product qualification manual when packaging.