Cable reel specifications and models: The cross-sectional area of ??the cable ranges from 1.0 to 240mm. The outer diameter of the cable directly affects the axial size and power requirements of the coil.
When the cable cross-section is 35mm, non-electric coil cannot be selected. Flat cables can only be used in axial single row rolls. The cables should be power cables and control signal cables, which are relatively soft and have a certain tensile strength.
Cables include power cables, control cables, compensation cables, shielded cables, high temperature cables, computer cables, signal cables, coaxial cables, fire-resistant cables, marine cables, mining cables, aluminum alloy cables, etc. They are composed of single or multi-strand wires and insulation layers, and are used to connect circuits, electrical appliances, etc.
Copper is the main conductor material used in wire and cable products, so the copper core code T is omitted, except for bare wires and bare conductor products. Bare wires and bare conductor products, power cables, and electromagnetic wire products do not indicate major category codes. Electrical equipment wires and cables and communication cables do not list either, but small category or series codes are listed.
Related instructions
1. Excellent fire resistance, the fire resistance level not only meets the international GB12666.6A category 950℃90min, but also meets the British BS6387-1994 Class A 650℃3h?B Grade 750℃ 3h and Grade C 950℃ 3h are required to withstand water spray and mechanical impact during combustion.
2. Long continuous length. Whether it is a single-core or multi-core cable, its length can meet the power supply length requirements, and the maximum length can reach 2000m.
3. The cross-section of single-core cable with large cross-section can reach 1000mm2. The cross-section of multi-core cable can reach 240mm2.
4. It is flexible and the cable can be coiled on the cable drum. Its bending radius is ≥20D, and D is the outer diameter of the cable.
5. It is smoke-free and non-toxic when burned. The insulation is made of inorganic material "non-combustible body". It will not produce any harmful gases when burned, and there will be no secondary pollution. It can be called an environmentally friendly green product. .