When cleaning the range hood, most people are used to taking it apart for cleaning, which is a waste of time and easy to damage parts. This paper introduces a time-saving and labor-saving cleaning method without disassembling the machine.
1. Take a plastic bottle (any kind of beverage bottle that can be flattened by hand), poke 10 holes in the bottle cap with a sewing needle, then fill it with a proper amount of cleaning essence, then fill it with warm water and shake it well.
2. Start the range hood, and spray the cleaning liquid to the part to be washed with a plastic bottle filled with cleaning essence. At this time, you can see that the oil pollution and dirty water flow into the oil storage hopper together and will fall with the filling.
3. After the cleaning solution in the bottle is used up, continue to prepare and repeat cleaning. Until the dirty water flowing out becomes clear, it can be cleaned three times according to the degree of fouling.
4. If the fan blade is equipped with a net cover, it is recommended to remove the net cover first to enhance the washing effect.
5. Wipe around the air inlet, the surface of the shell and the lampshade with a rag. However, even in the cleanest kitchen, there is one place that will be ignored by some people, so it becomes a small corner of your kitchen hygiene-the range hood box.
But anything stained with oil is not easy to clean, not to mention this box containing gutter oil. After a long time, it will be more difficult to restore the original appearance. Let's share a simple method. Let's put "work" before "use":
First, pour a layer of detergent into the clean range hood box, and the amount of detergent is about 1/3 of the range hood box.
Then apply detergent to the periphery of the range hood box with your fingers stained with detergent and put it on the range hood.
Excuse me, how to wash the range hood, what materials do you need to wash it with, and what should you pay attention to if you wash it yourself?
Cleaning the range hood can save electricity
A range hood will attach a lot of oil stains after being used for a period of time. At this time, if the cleaning method is improper, it may increase the power consumption during continuous use.
Li Tienan, Director of China Energy-saving Product Certification Center: Frequent disassembly and cleaning of range hoods will lead to deformation of parts, thus increasing resistance and power consumption. In fact, lampblack generally does not enter the motor, so it is recommended to scrub the surface.
Experts remind that when cleaning the range hood, do not wipe the blades, but spray detergent on the blades to make them rotate and dry, so as to avoid the deformation of the blades and increase the resistance. Don't use the range hood as a ventilation device, only turn it on when there is lampblack. When cooking, try to use low-power lighting on the range hood and turn off other indoor light sources.
Cleaning of range hood
1, you can clean the range hood with heated detergent solution.
2. If the range hood is dirty and the dirt is too thick, it can be cleaned with liquid glass window cleaner.
3. The oil filter can be cleaned by dishwasher.
4. When there is too much oil accumulated on the oil filter screen, it is not advisable to wash it with porcelain.
5. If you wash the oil filter by hand, it is best to soak the oil filter in the washing liquid for several hours.
Quick cleaning range hood
1, pressure cooker steam flushing method. Boil the pressure cooker cold. When steam is continuously discharged, take the lower pressure valve, open the range hood, and aim the steam water column at the rotating blades. When high-heat steam continuously rushes into the blades and other parts, oil will flow into the waste oil cup along the way until there is no oil in the oil cup.
2. Detergent vinegar bubble method. Take out the leaves that smoke, soak them in a basin of warm water, mix them with 3-5 drops of detergent and 50 ml of vinegar, soak them for 10-20 minutes, and then scrub them with a clean rag. The shell and other parts are also cleaned with this solution. This method has no damage to the human body panel and no corrosion to the equipment, and the surface remains the same after cleaning.
3. Soap surface coating method. Make soap into paste and spray it on the surface of impeller and other devices. After a period of time, the impeller and other devices will be removed from the range hood and wiped with a rag, and the oil will fall off.
How to clean the range hood without disassembly and washing?
[Cleaning] Tell you five tips for cleaning the range hood without disassembly and washing (Figure)
A friend wants to buy a range hood. After learning in the store, Dan found that the range hood can be cleaned automatically, that is, there is a hole in the range hood, and a special cleaning agent can be poured on it. Press the button and the range hood will automatically clean. There is also a range hood, which does not need to be cleaned and is completely free of washing. Promoters have their own reasons, so what kind of range hood is good? The author answers for you:
No matter whether it is automatically cleaned or not, the oil deposited in the range hood will not be cleaned, because the oil fume is difficult to clean, and the automatic cleaning will not be cleaned. You can think about it, if our range hood is dirty, we can't wash it by hand, let alone automatically. It just puts some cleaning liquid in the range hood for several turns, and it is even more impossible to clean the range hood. The oil filter screen is used to prevent the range hood from entering the range hood. You just need to clean the oil filter. Soot that needs to be cleaned for a long time also needs to be cleaned, but it doesn't need to be cleaned so frequently. Therefore, compared with these two kinds of payment, it is more practical to avoid disassembly and washing. I suggest you choose to avoid unpacking and washing.
Do you have any tips for cleaning range hoods?
When cleaning the range hood, most people are used to taking it apart for cleaning, which is a waste of time and easy to damage parts. This paper introduces a time-saving and labor-saving cleaning method without disassembling the machine.
1. Take a plastic bottle (any kind of beverage bottle that can be flattened by hand), poke 10 holes in the bottle cap with a sewing needle, then fill it with a proper amount of cleaning essence, then fill it with warm water and shake it well.
2. Start the range hood, and spray the cleaning liquid to the parts to be cleaned with plastic bottles filled with cleaning essence. At this time, you can see that the oil pollution and dirty water flow into the oil storage hopper together and will fall with the filling.
3. After the cleaning solution in the bottle is used up, continue to prepare and repeat cleaning. Until the dirty water flowing out becomes clear, it can be cleaned three times according to the degree of fouling.
4. If the fan blade is equipped with a net cover, it is recommended to remove the net cover first to enhance the washing effect.
5. Wipe around the air inlet, the surface of the shell and the lampshade with a rag.
References:
hangzhou.jiatx/news/2008-06-0 1/ 1004878 1
How to clean the Chinese range hood yourself?
I went to buy a bottle of Mr. Wittmann's strong cleaning liquid and used it according to the instructions. I used it at home, and the effect is not bad. Don't worry, I'm not asking.
How to clean Chinese range hood
If you use it for a short time, you can use a professional cleaning solution, which is sold in supermarkets. If it takes a long time, it is suggested that it can be scalded with hot water first, and then cleaned, because some oil stains are massive at this time, which is not easy to clean. So I suggest you clean it regularly in the future.
What if the range hood can't be cleaned automatically?
There is a self-priming pump next to the oil cup. . Push up. Then it will pop up automatically. Then you should have a big self-cleaning cup. The kind with a partition in the middle. Wash the water cup on the left with warm water, and then pull the self-priming pump into the water of the water cup. . This cup can be hung on the hood. You can touch the back of the oil drain cup of the range hood, pull it down and hang it. Then press the cleaning button on the range hood and it will be cleaned after 90 seconds.
Disadvantages of automatic cleaning range hood
There is a view that every scientific and technological progress can not be separated from the promotion of lazy people, and this is indeed the case. We can see the emergence of various automation products in life, from washing machines to dishwashers, from rice cookers to sweeping robots. We found that both new products and old products have more or less seen the shadow of automation, and our hands are getting easier and easier. The attack trend of automation is more and more severe, and more household appliances have joined the ranks of automation. Among them, the range hood has also joined this team, and the automatic cleaning function has become a new favorite in the near future. The manufacturer claims that only the cleaning liquid needs to be added to the special cleaning kettle, and the wind wheel can be ejected within tens of seconds by gently pressing the button, and all the oil stains stuck on the wind wheel can be directly cleaned by the high-speed operation of the wind wheel. Is that really the case? Let's take a look. ● What is the automatic cleaning function of the range hood? The invention relates to a range hood technology with an automatic cleaning device, which comprises a shell, a wind wheel and a cover, wherein the shell is provided with a liquid storage tank, a booster pump and a nozzle; The nozzle is positioned below the wind wheel and connected with the liquid storage tank through a liquid outlet pipe and a pressurizing pump; The periphery of the cover contacting with the shell is also provided with a sealing ring and a magnetic block. Due to the adoption of the structure, the purpose of automatically cleaning the oil in the range hood can be achieved. ● Principle of automatic cleaning function Under the dual action of fan rotation and liquid injection, the cleaning liquid generates high-speed swirl friction with the inside of the wind wheel and cabinet, so that the oil stain is completely decomposed and discharged through the oil guide pipe. ● Consumer response: There are different opinions. Ms. Chen said: "I am lazy and don't like to do housework at ordinary times." Of course, I prefer to buy a self-cleaning range hood. Although it will cost more money, it is still worth it for the convenience in the future. However, Mr. Sun also questioned the automatic cleaning function of the range hood. He said: "It is very difficult for my wife to clean up the oil stain with a rag, not to mention it will float with the water. It just puts some cleaning liquid in the range hood for a few turns. Can I clean it? And if the injected cleaning agent is not cleaned, it is even more unsanitary to fall into the pot when cooking. "We found that consumers don't fully trust this function, so what about his market on the Internet? Let's take a look. ● Analysis of the present situation and shortcomings of automatic cleaning function; Market Analysis of Online Automatic Cleaning Range Hood In JD.COM Mall, the sales of range hoods with automatic cleaning function are not low, and the general favorable rate is above 90%. So what is the real situation? From the sales records related to the platform, we found that the 5-point praise given by most buyers is actually based on the appearance of the products and the service attitude of the distributors. Many buyers gave 5 points for being useless. The author searched hundreds of favorable records, and none of them mentioned the automatic refresh function. There is not much technology in itself. The automatic cleaning function of range hoods first appeared in Guangdong 1999. The original prototype was simple, and it was transformed from a car sprayer. At that time, there was only one nozzle, and the cleaning effect was only average, and there were some problems such as insufficient cleaning, so it was not widely promoted at that time. According to industry insiders, in fact, there is not much technological innovation in the current automatic cleaning function. Just replacing the simple sprayer with a high-speed wind wheel and replacing it with a relatively professional detergent, the functional principle and research and development mechanism have not been greatly improved. With this doubt, we found that the 3D pulse jet grouting technology and backwashing technology in the official propaganda did not have any patent number. Through our online price inquiry, it is found that the price of range hoods with automatic cleaning function is widely distributed, ranging from 1298 yuan to 6 199 yuan, which shows the first clue. Through investigation, we found that there is little difference in the automatic cleaning function between the two, and the high value of 6 199 yuan is more reflected in the influence of the brand. The cleaning effect is not ideal. As we all know, the oily ingredients in the kitchen are very complicated. Include animal fat and vegetable oil, which belong to organic esters and are a mixture of saturated or unsaturated higher fatty acid glycerides. The difference between them and mineral oil is that saponification reaction can take place under alkaline conditions. Which is what we often call grease. Oil dirties need to be soaked in detergent and wiped with a certain force before they can be removed. Although high-speed rotating friction occurs between the cleaning liquid and the wind wheel and the inside of the box under the dual effects of fan propaganda and liquid injection, it is doubtful whether the generated force can shake the oil scale after the water vapor is highly compressed into extremely fine water droplets. The author found a case of 3 15 on 20 12, and even the maintenance master said that the automatic cleaning function would fail if there was too much oil. ......
Can you clean the range hood without asking professionals? How should I clean it?
1. Pressure cooker steam flushing method. Boil the cold water in the pressure cooker. When the steam is continuously discharged, take the low-pressure valve, turn on the range hood, and aim the steam water column at the rotating blades. As high-temperature steam continuously rushes into the fan blades and other parts, oily sewage will flow into the waste oil cup along the way until there is no oil in the oil cup. ..
2. Soaking with detergent and vinegar. Remove the oil smoke extraction impeller, soak it in warm pot water mixed with 3-5 drops of detergent and 50 ml of vinegar for 10-20 minutes, and then scrub it with a clean rag. The shell and other parts are also cleaned with this solution. This method has no damage to human body panel and no corrosion to equipment, and the surface still maintains its original luster after cleaning. ..
3. Soap surface coating method. Make soap into paste, and then smear it on the surface of impeller and other devices. After the range hood is used for a period of time, remove the impeller and other devices and wipe it with a rag, and the oil will fall off. ..
The range hood puts daily maintenance first. When you finish the last dish, don't turn off the switch immediately, and let the range hood exhaust the remaining oil and gas as much as possible. After turning off the switch, it is convenient to wipe the surface of the range hood. At this time, the oil and gas is still hot and it is the easiest to clean. ..
If a turbine-type range hood is used, the kitchen oil stain cleaner can be sprayed into the range hood, and then the switch of the range hood is turned on after the cleaner acts, and the softened oil stain can be removed by centrifugal force. ..
If you use an oil net range hood, you must remove the oil net, soak it in hot alkaline water or degrease it and clean it. ..
To clean the oil cup, you can wrap the oil cup with plastic wrap. When the oil stain is full, remove the plastic wrap, which is convenient, quick and clean. This is the secret of kitchen cleaning. ..
Range hood is an electrical product that people use to solve the problem of kitchen fume. However, if it is used for a long time, the surface and inner cavity of the range hood will be full of oil pollution, which will affect its normal smoke exhaust effect. Only when it is disassembled and cleaned correctly can it be used normally. In general, the cleaning process of range hood without filter screen cover is as follows:
1. First cut off the power supply of the range hood to ensure personal safety.
2. The shell surface and net cover of the range hood are generally cleaned according to the cycle specified in the manual, and the soft cloth is scrubbed with a small amount of warm water and neutral detergent. Then dry it with a dry soft cloth. ..
3. Disassembly and cleaning of the inner cavity of the wind wheel and volute:
(1) Unscrew the screws of the cover plate and net cover, and remove the cover plate and net cover. ..
(2) Then unscrew the fastening screw of the wind wheel and take out the wind wheel. ..
(3) Soak the removed parts in warm water containing neutral detergent, clean them with a soft cloth and dry them. ..
(4) Dip a small amount of warm water containing neutral detergent with a soft cloth to scrub the dirt in the inner cavity of the volute, and then dry it after cleaning with a soft cloth. ..
(5) Assemble the above components in the reverse order of disassembly. ..
(6) After installation, check whether the oil circuit of the appliance is unblocked and whether the sealing ring on the volute can be sealed. ..
(7) Please clean the wind wheel, volute, oil nozzle and oil drain pipe according to the cycle specified in the manual. ..
4. Precautions for cleaning impeller and volute:
(1) When cleaning, water cannot enter the motor and electrical components. ..
(2) When cleaning, don't forcibly pull the internal connecting wire, otherwise it will loosen the connecting point and cause electric shock. ..
(3) It is forbidden to clean the range hood with flammable solvents such as alcohol, banana oil and gasoline to prevent fire accidents. ..
(4) When cleaning, wear rubber gloves to prevent sharp edges of metal parts from hurting people. ..
(5) Handle the removed parts carefully to avoid deformation. Be especially careful when cleaning the impeller. Do not touch or move the counterweight of the blade, otherwise the whole machine will vibrate and the noise will increase. ..
For those range hoods with filter screen covers, because the oil fume has been filtered before entering the electrical appliance, the internal structure does not need to be cleaned, only the electrical appliance shell and filter screen cover need to be cleaned according to the cycle specified in the manual. ..
5. Cleaning of filter screen cover:
(1) Unscrew the screw that fixes the net cover. ..
(2) Soak the removed filter screen cover in warm water of neutral detergent for 5- 10 minutes. ..
(3) Clean the dirt in the pores of the filter with a soft plastic brush, and then dry it with a dry rag. ..
(4) Install the filter screen cover as it was before disassembly. ..
(5) After installation, check whether the oil circuit of the appliance is unblocked and whether the sealing ring on the volute can be sealed. ..
(6) Please clean the filter screen cover according to the period specified in the manual. ..
Don't disassemble and clean the wires and air flow seals inside the range hood frequently. Frequent disassembly and cleaning of sealing rings can easily lead to aging and deformation, and oil stains can easily enter the electrical connection parts of electrical appliances and scare people. ......
Automatic cleaning of range hood, how to start cleaning?
Where there are screws, they can be removed, and others that cannot be removed can be sprayed. Can you take it apart? If it can be disassembled, I recommend a very safe and environmentally friendly product for cleaning range hoods, which can be cleaned and sterilized at the same time.