Glass cutting machine, as its name implies, is a mechanical device used to cut glass. It is a special processing machine for glass processing and blanking. Generally, it consists of an air-floating film conveying platform, a double-bridge overpass cutting platform and a glass conveying mechanism connected end to end.
Second, the glass cutting machine operation method
Glass cutting machine is a large machine, which should be operated according to the correct operation methods and procedures. The steps of correctly operating the glass cutting machine are as follows:
1, take safety protection measures and wear gloves, protective glasses and special iron shoes.
2. Turn on the power switch, start the ncstudio program, first return to the mechanical origin, then return to the fixed point, then load the programs to be applied and confirm them.
3. Place the glass to be cut on the cutting table of the glass cutting machine.
4. Press the blowing button on the cutting machine, and the glass can float on the cutting table and move freely, which is convenient for positioning.
5. Place the glass on the cutting table, press the stop button to end the blowing function, and then press the suction switch with your foot to firmly fix the glass on the cutting table with the suction function, which is convenient for cutting.
6. After cutting, press the stop switch to stop the suction function, and then turn on the blowing switch.
7. Turn on the blower switch of the dividing table, clean up the sundries and dust on the table, and then move the cut whole glass to the dividing table in parallel, and be careful during the movement.
8. For the glass on the dividing table, clean up the leftover materials around and put them in the designated corresponding position. Then, divide the whole glass into small pieces according to the cut marks.
9. Separate the small pieces of glass and stagger the tea racks vertically. This process must not be omitted, and the vertical angle of the glass must be ensured.
10. After cutting a piece of glass, clean the cutting table and the indexing table of the cutting and cutting machine with an air gun, and then place the next piece of glass for new cutting.
Three, the operation of glass cutting machine should pay attention to what matters?
1. When using the glass cutting machine, it is not allowed to plug and pull the parallel wires connected to any hardware equipment such as computers or control cards. The shell of computer or glass cutting machine should be grounded to ensure safety and prevent interference. Please turn off the power in time when the machine is not working, and unplug it when it is not used for a long time.
2. Before operation, turn on the power supply to return to zero, and then manually try various functions, including injecting cutting oil, whether the air pressure is normal and whether the cutter head is worn.
3. When loading graphics, make sure that the loaded graphics are within the cutting range.
4. Before cutting, check the glass to be cut. There should be no white spots and scratches on the appearance.
5. When cutting, make sure there is no one beside the Y axis.
6. In principle, other operations should not be carried out during the operation of the glass cutting machine, and other non-emergency stop operations should be carried out after the cutting is completed.
7. After cutting a piece of glass with a glass cutting machine, clean the countertop in time to prevent glass fragments from scratching the countertop.