Time always passes suddenly, and the new year of work begins in a trance. Excellent employees will write themselves an annual work summary. It can effectively help us review the past. So what are your thoughts on writing positions now? The following is the "Year-End Work Summary of Instruments" compiled by me for you. You are welcome to share it with your friends! Instrument year-end work summary 1
Looking back on the work of the past year, with the support and help of the company leaders and colleagues, I strictly required myself and completed my duties well in accordance with the company's requirements. Work. Through one year of study and work, there have been new breakthroughs in the work model and major changes in working methods. The work situation over the past year is summarized as follows:
1. Daily work
1. Straighten out the relationship. Through hard work, I have mastered the process of my position, as well as the functions and uses of the table numbers and various types. It only took me more than a month to deal with my colleagues and their leaders. Under the care and guidance of leaders and colleagues, I have grown actively and my professional skills have improved rapidly.
2. Quickly understand the location of our equipment, its installation and functions, and actively and efficiently complete the work assigned by the leadership. As a member of xx Chemical Company, I feel extremely happy and honored. I have some experience in my previous work, but I still found out here that the employees here have extremely rich work experience, professional knowledge and skills. In the future, I must actively communicate with my colleagues and leaders to understand and discover the shortcomings and professionalism of my work in a timely manner. Skill deficiencies.
3. Do a good job in the work arranged by the leaders of this workshop and participate in various studies to continuously improve yourself. Actively communicate with colleagues and truly integrate into the loving, positive and energetic family of xx Chemical Industry.
2. Self-study
1. Strengthen self-study and improve professional level. Because I feel that I have a heavy burden, and my knowledge, ability and experience are incompatible with my position. There is a distance, so I never dare to take it lightly. I am always learning, learning from books, learning from the leaders around me, and learning from my colleagues. In this way, I feel that I have made some progress in the past year. After continuous learning and accumulation, I have gained work experience and can deal with various problems that arise in daily work relatively calmly. After a year of training, I have improved my comprehensive analysis ability, coordination ability and written and verbal expression ability. It has made great progress and ensured the normal operation of various tasks in this position. It can treat various work tasks with a correct attitude, love its job, and work hard to implement it in actual work. Actively improve one's own qualities, strive for work initiative, have a strong sense of professionalism and responsibility, and strive to improve work efficiency and work quality.
2. Existing problems and future efforts. Over the past year, I have been dedicated to my job and carried out my work creatively, and have achieved some results, but there are also some problems and deficiencies, mainly reflected in:
First, some work is not detailed enough, and some professional skills and theories have not been fully mastered;
Second, my level is not yet adapted to the requirements of the company's work.
In the new year, I am determined to seriously improve my professional skills and work standards, and contribute my share to the company's economic development by leaps and bounds. I think I should strive to do the following:
First, strengthen learning and broaden knowledge. Work hard to learn professional knowledge and relevant professional skills. Strengthen the understanding and study of the surrounding environment and the development of the same industry, and be aware of the company's overall planning and current situation;
Second, in line with the principle of seeking truth from facts, we must communicate the situation from top to bottom and communicate with others below. Report; truly be a good assistant to the leader;
Third, pay attention to the construction of the work style of the department, strengthen management, unite as one, work diligently, and form a good department work atmosphere. Abide by the company's internal rules and regulations, safeguard the company's interests, actively create higher value for the company, and strive to achieve greater work results.
Appearance Year-end Work Summary 2
It is undeniable that women’s status and confidence in the business world are getting higher and higher, and their clothing at work is also particularly important. But so far, the dress of professional women has always been The issue of debate. People in the clothing industry have put forward several principles for dressing professional women.
1. Suits are indeed the most suitable clothing for women at present, but overly fancy and exaggerated styles must be avoided; extremely conservative styles , you should master how to accessorize and embellish to make it look more rigid. If you wear several sets of suits cleverly, it is not only a modern dressing trend: it is also a dress that conforms to economic principles.
2 , The importance of materials is a fact. The so-called materials refer to the quality of the fabrics, tailoring techniques, and contours of the clothing. Professional women must not ignore it when choosing suits.
3. Overly sexy or revealing clothing must not appear in the office, as this will cause unnecessary trouble. For example, male colleagues or bosses who have inappropriate thoughts will leave people with the impression of a "vase", and Losing the possibility of promotion. If you are a woman who values ??her career or career, you must pay attention to this.
4. Modern professional women have a very active lifestyle and need to often pay attention to changes in clothing. Above, modern professional women know how to avoid the problem of changing clothes with clever decorations. Before going out, make some arrangements to make sure everything is safe.
5. Today’s dress is about elegance Etiquette, dressing appropriately at the appropriate time, place and place is something that modern women cannot ignore. Professional women also note that in addition to paying attention to dress, the overall dress from head to toe should also pay attention to emphasizing "overall beauty" which is modern. The most popular word in dressing.
Although it is very suitable for professional women to wear suits, any clothing that can express the style of professional women is worth a try. Under certain rules, you can enjoy wearing it This is also the right of modern professional women.
Section 3 Standards of Speech and Behavior in Business Activities
In our daily business activities, business etiquette is widely used. In addition to appearance, speech and behavior, that is, professional performance, will also involve a lot of content. In daily business activities, what issues do we need to pay attention to in speech and behavior?
Let’s look at social etiquette, that is, the etiquette habits that we need to pay attention to when we meet others for the first time. Please think about it, what issues do we need to pay attention to when we meet people for the first time? ?
(1) Eye contact
Make eye contact with the other party, and do not look left or right.
(2) Selection and use of titles
Under normal circumstances, in business activities, there are two sets of methods of address. The first is to call the other party Mr. so-and-so or Ms. so-and-so. This is also the most secure and common way of addressing
Second, we can call each other a certain manager, such-and-such supervisor, such-and-such director, and such-and-such leader, which means directly addressing his position.
(3) Shake hands
The order of shaking hands is generally that women stretch out their hands first, then men shake hands. Leaders, superiors and elders stretch out their hands first, and then subordinates and juniors shake hands.
When shaking hands, after the other party extends his hand, we should Greet each other quickly. The most important thing to avoid when shaking hands is that many people shake hands with each other.
Also avoid shaking up and down excessively when shaking hands.
(4) Mutual introduction< /p>
When introducing each other, you should pay attention to the choice of order. Generally, the person with a higher position will start the introduction first. If it is divided into host and guest, the host should be introduced to the guest first, and then Then introduce the guest to the host.
(5) Exchange business cards
Take out your own business card with both hands. There is a pause at this time, and you should pay attention to adjusting the direction of the business card. Go to the most suitable position for the other party to see it and hand it over. Take the other party's business card with both hands and briefly read the content on it. Neither put it directly in your pocket or put it in another position without looking at it, nor do you look at it for a long time. Instead of holding it in your hand and fiddling with it, you should put the business card in a dedicated business card holder. Try to avoid putting the business card in your pocket or putting it in other places. <
/p>
() Other matters needing attention Instrument year-end work summary 3
20XX is a year when xx branch takes off. I also feel deeply inspired and motivated while working in an ordinary position. Prompt, looking back on the past year, from the Lunan Project Department of the xx South Dual Structural Adjustment Project to the xx Zhongneng Phase 2 xx Project Department to the xx Zhongneng Phase 3 xx Project Department, I am full of emotions. The following is for me in xx The work of the year is summarized as follows to spur yourself on continuous progress and growth.
First of all, I will review and summarize the work in the xx project department at the beginning of the year. The xx South Project Department is my first project after I joined the work. I served as a professional technician in electrical instrumentation in the engineering department of the project department. At the beginning of the year, I It is an important stage for the system commissioning of the synthesis device of the xx project department. Because the control chain system of the synthesis device is complex and there are many intelligent instruments, the task of the electrical instrument major in the system commissioning is extremely heavy. This is very important for me who has just joined the work for less than a year. Said it was a severe test.
Instrument system circuit debugging and interlocking debugging are the focus and difficulty in instrument construction. Therefore, in order to fully understand and master the instrument system debugging method, I humbly report to everyone on site after work. A master learned the instrument installation and debugging methods and precautions, and actively participated in the installation and debugging of instrument engineering construction, achieving good results and laying the foundation for the successful completion of the instrumentation technical tasks of the synthetic device.
There are many points and complex principles, which puts forward extremely high requirements for instrument wiring and debugging. The entire synthesis device control system is divided into Siemens itcc synthesis gas unit monitoring system, esd ammonia gas unit monitoring system and Zhejiang University Central Control DCS distributed control system. The compressor and turbine turbine unit monitoring system occupies an important position in the entire synthetic device control system. Therefore, during the system debugging stage, we first focus on debugging the itcc and esd monitoring systems. The monitoring system mainly performs monitoring of the steam turbine unit and compressor unit. Monitoring and control of shaft vibration, shaft displacement, and turbine speed; in addition, a unique phenomenon of the compressor unit is the surge phenomenon. The airflow flowing back and forth in the compressor is surge. With the surge, the compressor vibration increases sharply, similar to The huge abnormal noise of asthmatic patients, etc., if not effectively controlled, will cause serious damage to the compressor. The surge condition develops very quickly, usually occurring within xx seconds, so precise control algorithms and rapid control are required. Algorithms can achieve effective control. The surge phenomenon is extremely harmful to the compressor unit, and may even cause major accidents. Therefore, during the instrument debugging stage, correct detection and precise control of the anti-surge adjustment loop system are required to ensure the normal operation of the compressor unit. The key point is that during the system debugging stage of the Luhua synthesis unit, the on-site instrument debugging personnel and I actively cooperated with the owner's debugging personnel to conduct multiple tests on the anti-surge regulating loop system of the syngas compressor unit and turbine steam turbine unit and complete it in detail. Secondly, the interlock control debugging of various pumps in the lubricating oil system and condenser system is another debugging focus of electrical instrument debugging. The correct interlocking between the lubricating oil main and auxiliary pumps and the condensate main and auxiliary pumps is also the compressor Therefore, during the system debugging process, I worked with the construction team to analyze the interlocking schematic diagram designed by the design institute to gain an in-depth understanding of the design intention, especially the relationship between the lubricating oil pressure and the main lubricating oil. The start-stop interlock between the auxiliary pumps and the start-stop interlock between the main and auxiliary pumps for condensate are the key to the normal operation of the entire compressor unit and turbine unit. According to the design drawings of the Luhua synthesis unit, the original lubricating oil pump and condensate pump The main and auxiliary pump interlocking is controlled on-site at the on-site operating column. In order to better monitor and control the main and auxiliary pump interlocking in real time and ensure the safe operation of the entire unit, after consultation with the owner's instrumentation specialist, an additional linkage was added in the instrument control room. Lock control, after half a month of intense rectification and debugging, the lubricating oil pressure control system, speed control system, unit interlocking self-protection system, etc. have all reached the conditions required for start-up, laying the groundwork for the successful start-up of Luhua's synthesis unit. a solid foundation.
The xx phase 2 xx project is my second project after I started working. The biggest feature of the instrumentation engineering of the xx project is that there are many intelligent regulating valves and switch valves, a large number of switch points in the control room, and a small instrument construction space. , the construction period is short, the amount of work is large, and most of the process media in the busbar are flammable and explosive substances, which puts forward higher requirements for the performance of the regulating valve and on-off valve. At the same time, our construction unit requires cleaning and pressure testing of the regulating valve. Leakage work also puts forward very high requirements. In order to better complete the cleaning, pressure and leakage testing of more than 300 regulating valves, before installing the regulating valves, we concentrated on cleaning and testing the regulating valves in the prefabrication field. For the pressure leak test work, since most control valves are air-opening control valves, it brings many difficulties to the cleaning and degreasing of the control valves. After consultation with the construction team technicians, it was decided to use an air pump to supply the instrument air source and use a Hart communicator to apply the pressure. The signal will open the regulating valve, and the cleaning personnel will clean it when the regulating valve is open; it ensures that the process pipeline installation team can install the regulating valve in time, speeding up the construction progress; when the second phase of the project restores the normal operation of the workshop, the indoor temperature of the busbar is as high as 4 More than ten degrees Celsius, which greatly affects the measurement accuracy of trichlorosilane and hydrogen feed line flow (thermal mass flow meter). In order to improve the accuracy of material flow measurement, after consultation with the owner and supervisor, the intelligent thermal mass flow meter The meter head is moved to the outer wall of the busbar, and the special sensing cable is passed through the cable protection tube and connected to the meter head from the thermal mass flowmeter sensor to avoid the influence of high temperature in the busbar room;
Phase II After a period of production operation in the reduction workshop, the owner's technicians found that the temperature of the vaporized tri-hydrogen silicon gas came out of the connecting pipe in the vaporization room and entered the bus chamber. The normal insulation measures were no longer able to meet the normal production of the product. The owner's decision was made after research. Electric heating is added to the trichlorosilane pipeline. The electric heating temperature control scheme uses the xxx e5cz-r2 intelligent temperature controller to control the electric heating tape. When the owner stops a furnace, the corresponding pipeline insulation layer is removed. and recovery, winding of electric heating tape, installation of branch pipeline explosion-proof distribution box, cable protection pipe piping, temperature controller installation, end junction box installation, cable laying wiring and debugging, the power supply is taken from the main explosion-proof distribution box; should The owner requires that the electric heating tape should be wrapped around the pipe. Because the temperature of the pipe is too high, construction workers are strictly prohibited from contacting any part of the body with the high-temperature pipe when working. When fixing the heating tape and temperature probe, one person must use pliers and other mechanical tools to fix the heating tape. The other two people are located at both ends of the heated pipe and use aluminum tape to wrap the heating tape hand-in-hand to fix the heating tape on the pipe.
The main physical engineering quantities of the instrument installation project of the xx phase 3 xx project are: three sets of xxx tps dcs control systems, with a total of more than x 10,000 analog and digital points; more than 10,000 fiberglass trough cable trays meters, more than 600,000 meters of instrument control cables, more than 10,000 meters of pipes, and more than 10,000 pieces of intelligent instrument equipment such as regulating valves, flow meters, and transmitters; three production lines are under construction at the same time, including civil engineering, process piping, and HVAC. , decoration, electrical, instrumentation and other professional ultra-deep cross-construction construction. The first production line was delivered for civil engineering installation at the end of June and was delivered to the owner for production at the end of June. The instrumentation construction period is very short and the workload is extremely heavy. During the construction of the xx central control room in the third phase, by checking the instrument bridge layout diagram, it was found that according to the xx central control room instrument corridor bridge layout diagram (white picture) designed by the design institute, the originally designed instrument corridor bridge space was too small, such as If the construction is carried out according to the original design, the installation of instrument bridges and cable laying will be impossible because the space is too small. Moreover, since the corridor bridge is inside the suspended ceiling, the site is a 100,000-level clean area. After the construction is completed, personnel will not be able to enter the suspended ceiling. It will bring great difficulties to the maintenance of various instruments in the future.
According to the actual situation on site and discussion with the owner, the instrument corridor bridge was changed to a steel platform, the trough bridge was cancelled, and the original designed fiberglass trough bridge installation project and the changed instrument steel platform were installed. Cost analysis and comparison between projects showed that the original design total cost was more than 5 million yuan, of which the installation cost was more than 900,000 yuan. After the change, the total cost was more than 3 million yuan, of which the installation cost was more than 2 million yuan ( The steel structure steel material is supplied by B); this change not only facilitates installation and construction, creates conditions for laying instrument control cables, but also brings great convenience to various instrument maintenance in the future; saving the owner a total cost of more than two million yuan , while increasing the cost of the installation project by more than one million yuan.
At this stage, the instrument installation project of the first production line of the xx Phase III xx project has entered the normal production stage, and the instrument installation project of the second production line has entered the system pressure test and leak test stage. For engineering and technical personnel like me For me, the challenge has just begun. In my future work, I will work hard to learn new knowledge, sum up experience and lessons, and meet new challenges with fuller enthusiasm. Instrument year-end work summary Part 4
20xx is about to pass, and the instrument work of our Hailun Petrochemical Company this year will soon be concluded successfully. Looking back on the work of the past year, we have made great progress both ideologically and technically. During this period, our oxidation instrument squad leader and engineer targeted the disadvantages of the young, inexperienced, and poor technical quality of our instrument personnel. Factors, in order to train the team as early as possible and improve the level, all personnel are strictly required to go deep into the site, actively familiarize themselves with and learn from the process flow, production equipment, instrument location numbers, cable routing and wiring, instrument configuration, computer DCS control, etc. The basic knowledge of instrument control must be gradually deepened.
During these more than three hundred working days, I felt that learning from colleagues, especially as a technical maintenance personnel, if I do not learn with humility and actively seek advice, the lack of practical experience will definitely become a constraint Bottlenecks in the development of personal work abilities. Therefore, every colleague, whether in my own unit or in their own department, is my teacher. I insist on learning from my colleagues, taking the strengths of others, making up for my own shortcomings, striving to enrich myself, enrich myself, improve myself, and cultivate people who are diligent in thinking. Work habits, enhance your ability to handle accidents independently, and basically adapt to the needs of your job. Only by constantly learning and asking for advice with an open mind can one's own quality and abilities be continuously improved. As a graduate majoring in electrical automation, I am engaged in instrumentation work. Although the instrumentation major on the platform also involves electrical knowledge, there are still many shortcomings for me, especially in some professional work. It was during this year's internship that I strictly required myself to meet the standards of a professional and was basically qualified for the job responsibilities of instrument maintenance. I must continue to maintain a humble attitude, learn from others, help others, sum up experience, and improve my professional level. Contribute to the company and set the instrument parameters correctly. For example, if the liquid level of a piece of equipment is an open container, how should its measuring range be set? If it is a sealed container, how should its measuring range be set, and how should it be set if it is equipped with a pressure guiding tube? You also need to understand this. To the working environment of the process and the media in it, etc. For another example,
If a method is always fluctuating, you must first understand whether the fluid flows into the container through the method or flows out of the container, whether the differential pressure on both sides of the method is large, and whether the lift of the pump reaches It is necessary to check whether there is a problem with the method locator, whether the PID on the DCS is adjusted correctly, etc. In short, many, many problems will arise during the debugging process. Once you participate in the processing, your skills will rise to a new level. As an instrument worker, it is not enough to only have the ability to deal with faults. In addition, you must also know the selection and anti-corrosion maintenance of instruments and how to do it safely.
When we first came here, we received factory safety and production training. At that time, many of us were considering whether to stay and continue to do this job. Finally, at the end of the internship period , whether you go or stay, I chose to stay and chose this industry.
The intense work is carried out in an orderly manner under the leadership of our squad leader. The squad leader arranges fixed routes for us in the morning and afternoon every day, allows us to go for inspections at fixed times, and assigns individuals to be responsible for inspections. Region, we are required to do it. Who is responsible for solving problems in which region? There is also a corresponding reward and punishment system, punishment for careless mistakes, and rewards for good work! If you don’t know how, you should study hard! We also strengthen and correct our learning attitude, assess our employees' on-site knowledge and instrument theoretical knowledge, and ensure that criticism and education should be given, and rewards should be rewarded. Our carelessness and lazy behavior will never be tolerated. Our requirements are very strict. This is a very good exercise for our employees to improve their own quality, work attitude and skills! Other old employees also actively introduced us to the work content and production lines. The one that impressed us most was the main equipment area A2. The other areas always remembered the confusion. It was not until the end of the overhaul that they really distinguished A1, A2, and A3. , C1, C2, C3 areas and what are the main functions of each area, as well as the characteristics of the instruments and valves included in each area.
Speaking of the maintenance at the end of June, I still have fresh memories. I worked overtime every day at that time. Although I was tired, I could learn a lot. I was familiar with cable wiring, such as junction boxes and wiring on junction boxes. And it strengthened my memory of some important place numbers. There is also some understanding of the canning unit. In daily work, squad leader Zhao of the oxidation unit and Master Pang of the boiler took us to the front line to explain and introduce things we didn’t understand. When we were working, we were asked to pay attention. Skills, use our brains, and teach us how to analyze a problem, how to see one aspect from one point, and conduct a comprehensive analysis of a problem. It not only picks out the careless mistakes in our work and criticizes and reminds us. For example, when you go out to work, bring a complete set of tools and check the tools in the bag in advance, such as hexagon socket, small spanner, small cross, slotted screwdriver, rubber band, needle nose pliers, terminal connector , multimeter, bandaging tape, insulation tape, and a series of tools! If something is missing, someone will have to come back to pick it up, which will delay the time to deal with the problem and affect production. Also, when dealing with a watch, talk to the craftsman first and ask if there is any interlocking! This is crucial! Because if we dismantle the watch without knowing it clearly, the watch will be interlocked! Then it will cause parking! It will seriously affect production and bring huge losses to the company! We may even face the dilemma of being fired! This is what we need to pay attention to in instrument work!
Also, our instrument leaders often come to our oxidation instrument department to strengthen our theoretical knowledge. In such an environment, our own comprehensive quality has been greatly improved!
What you need to learn in instrument work is not only superficial things, because if you don’t know the nature of the medium flowing in the pipe, you will rashly remove a meter and there will be nothing
< p> Under the premise of protective measures, the consequences will be unimaginable, and curiosity must not be too strong! For example, the pipes of a boiler are filled with steam with high pressure and high temperature. If there is any noise, you can't easily put your head over it and look around! In instrument work, technology is important! But life safety is more important! Especially in the instrument work of our chemical plants, we often encounter high temperature, high pressure, strong acid, strong alkali, and high noise. We must always be careful, pay attention to protect ourselves, and do not touch or dismantle it randomly! Move! This is safety in instrumentation work! For example, the 14615 valve last time used air to press the piston out from both ends of the cylinder! Due to an operational error at the time, the piston flew out with a pop. Fortunately, everyone was far away at the time. Only after the sound did we realize how powerful it was!Under the correct command of the company’s leaders, as the project construction transitions into production and operation, each link is continuously mastered and improved, promoting the progress and development of Hailun Petrochemical. As the instrument department of grassroots units, we will continue to train and train the team, improve the quality of work, do our jobs well, and contribute to the development and growth of the company. In this year, in order to ensure the smooth progress of production, our oxidation instruments will work closely with processes and equipment. Other departments actively cooperated and worked together to firmly grasp the efficiency of the production line! In the future work, we must work hard, continue to accumulate and learn, strive to improve our work skills, and make our due contribution to the development of the company.