Anti-blocking sewers
/ Steel wire balls + ropes = filter artifacts/
Bathroom floor drains are clogged, mostly due to hair and other fine objects that cause poor drainage. Problems such as water accumulation and odor will appear, which is the most troublesome. You must have never thought that steel wire balls can prevent sewer clogging. Let the editor explain it to you!
According to the size of the sewer, cut the discarded steel wool balls, take out one piece, pass the rope through the steel wool balls, and tie a tight knot.
Put it into the bathroom sewer and tie the rope to the floor drain cover.
The steel wire ball acts as a filter. The hair that falls in will get stuck on the steel wire ball and will no longer block the sewer, and the water flows unimpeded. Isn’t it amazing?
Tips: If the steel wool ball is dirty, it is best to clean it. Put baking soda, dish soap and water into the container in a ratio of 1:1:2.
Throw the steel wool in and soak it for 5 minutes, and the dirt will come out automatically!
Find a piece of wire and wrap it into a ring as large as the area of ??the floor drain. Then wrap the excess part into a twist shape and stand it up perpendicular to the ring. A handle will be formed.
Put the stockings on the wire ring, and wrap the extra part around the handle tightly. This is a simple and effective filter. Friends who are afraid of filtering water too slowly can cut a few cuts on the stockings.
Open the floor drain cover, place the filter on the water inlet, and close the lid. Hair, vegetable leaves and other debris will be blocked, and you no longer have to worry about the floor drain getting clogged!
Unblock the sewer
/ A plastic bottle can do it /
If the sewer is slightly clogged, a plastic bottle can do it! Prepare a plastic bottle and put a bottle of water in it.
Quickly tip the bottle upside down into the sewer and squeeze the bottle hard at the same time. At this time, the air in the bottle will be poured into the sewer. Under the action of water pressure, the blockage will be quickly pushed away. , the sewer immediately became unblocked.
/ Homemade dredge rod/
If the plastic bottle is turned upside down and it doesn’t work, you might as well make a homemade dredge rod, take out the plastic bottle, and cut it into a spiral strip like this, usually half a meter long. That's enough.
Use scissors to cut some small openings on both sides of the thin strip to form two long rows of barbs.
Tie two chopsticks together, wrap the cut plastic ring around the chopsticks like this, stick it with tape, or tie it tightly with a string in the middle.
Insert it directly into the pipe, poke it up and down a few times, and slowly pull the chopsticks back. You can easily pull out hair and other debris entangled in the water channel. After cleaning it several times, you can completely clear the sewer.