Advantages and features of this product:
Features:
Two convex grooves are designed at the socket end of the double-sealed pincer-shaped sound tube, and sealing rings are installed in the convex grooves. During installation, the socket end of the product is inserted into the socket end, and then the two convex grooves are simultaneously extruded by special hydraulic tongs, so that the pipe at the extruded position shrinks and deforms after being stressed, and the outer pipe between the two convex grooves is deeply immersed into the inner pipe, thus effectively realizing the reliable connection of the product; At the same time, the rubber sealing ring is deformed and stuck between the two layers of pipes after being squeezed, which plays an excellent double-safety sealing role.
Advantages:
1, connected by special hydraulic tongs, without preparation work and any equipment outside the construction site, simple and fast (5 times faster than the traditional method), easy to fix on the reinforcing cage, and not affected by bad weather.
2. The length can be matched according to the requirements of the site, and there is no loss.
3. This product is a patented product. Compared with similar products in the market, the tensile strength is higher, reaching more than 320Mpa (generally the tensile strength of other products is about 30Mpa).
5. Cost saving, preparation time saving, no need for technicians, loss saving (different types of short pipes can be customized according to customer requirements) and not limited by the site.
6. It is safe and does not need to be welded at the construction site.
7. Using the deformation of the pipe, the joint is clamped into two big ends and a small middle, so that the joint is stuck at one time and the possibility of loosening the joint is avoided. Whether in pull-out force or torque resistance, the performance is quite stable and excellent, and it bulges into a small convex arc, effectively avoiding collision with conduits, vibrators, etc.