1, stainless steel electroplating and iron basket are not ideal kitchen baskets.
Stainless steel baking basket is made by first plating copper on the surface of stainless steel and then baking. Although it has mirror luster, it is very thin, and it is easy to be scratched by tableware and the baking layer will fall off. In addition, its stainless steel material is poor and easy to rust. Rusty oxides and baking layer substances attached to tableware are harmful to human health and may cause cancer for a long time. The iron basket is also very thin, and the burnt layer falls off when it collides with tableware, which eventually leads to faster rust and harms human health.
2. Stainless steel electrolytic basket is an ideal kitchen basket.
Stainless steel electrolytic polishing basket is characterized by its high-quality stainless steel, no cross-layer, acid and alkali resistance, smooth surface, bright mirror surface, exquisite appearance, long-lasting and faithful color and durability. More importantly, it is healthy and environmentally friendly.
Matters needing attention in purchasing stainless steel electrolytic basket.
First of all, the basket itself is a durable product and is not easy to be damaged. However, the heavier the self-component, the greater the pressure on the pulley and the shorter the service life of the crawler. Therefore, the thicker the basket, the better, but it should not be too thin, otherwise it will be easy to trip. Generally, 8mm is enough for the main line.
Secondly, we should ask three questions:
"One question": Ask the materials.
Iron rusts easily, but there are many kinds of stainless steel. The quality of stainless steel is distinguished by its nickel content. The national standard stainless steel material is subject to the quality inspection report issued by the quality inspection department of the place of origin.
"three look":
1、? Look at the appearance
The appearance should be neat, the four corners should be 90 degrees, the four borders should be balanced, the bottom material should be arranged evenly, the surface should be uncoated, and there should be no burrs and pits manually.
2、? Look at the luster.
The color should present the unique temperament of stainless steel-silver blue mirror light. The mirror is bright and the appearance is exquisite. If the surface treatment process is not advanced, the surface silver gray is fuzzy (matt), which seriously affects the appearance, low grade, not exquisite and not noble.
3、? Look at the solder joint
The solder joint should not be too big. It is too big and ugly, and it is mostly virtual welding, which is not firm and should be slightly smaller than the size of the two materials themselves.
Finally, select the configuration. In the whole set of basket pulling, configuration is the most important.
Configuration 1: Slide rail: The slide rail has certain bearing capacity, so the slide rail with thick material, high smoothness, high bite and low noise should be selected.
Configuration 2: Fasteners: Fasteners should be made of stainless steel. The iron sheet is easy to rust, which affects the beauty and hygiene of the inner side of the door panel.