1. In order to reduce the wear and tear of sediment on the floor, you can lay floor mats at the entrance and clean them in time.
2. When transporting furniture and equipment, cushion pads must be placed on the transportation route and cannot be dragged directly on the floor.
3. Place cushioning pads between the feet of furniture and equipment and the floor.
The cushion size is slightly larger than the base size.
4. To prevent scratching the ground, do not wear spiked shoes when walking on the ground. If conditions permit, try to wear soft-soled shoes.
5. Pay attention to avoid hard or sharp instruments from falling on the floor to avoid damaging the floor.
6. For chewing gum dirt adhering to the floor, you can wrap water in a plastic bag and freeze it into ice cubes in the refrigerator. Then place the ice cubes on the chewing gum to cool and harden, and then carefully scrape it off.
7. Plastic floors should not be in direct contact with heat sources, and items with temperatures above 60°C, such as electric kettles, etc., should not be placed on the floor.
Carefully discarded cigarette butts, if not completely extinguished, will leave burn marks on the floor.
8. When cleaning plastic floors, you should use soft neutral detergent and warm water to wipe. Do not use strong acids or alkalis to clean the floors.
Be careful when using organic solvents to treat floors.
9. If ink, oil, etc. are spilled on the plastic floor, it must be dealt with promptly. For daily cleaning, washing powder, soapy water, etc. can be used to remove stains.
If you encounter stains that are difficult to remove, do not use scouring wire (steel balls) to polish them. You need to find professionals to deal with them in time to remove the contamination.
10. In order to reduce the wear and tear on the plastic floor surface, extend the service life of the floor, and keep the floor clean and beautiful, it needs to be thoroughly cleaned, waxed, and maintained regularly.
Usually once every 1-2 months.