1. Unpack the main engine and take out the main engine and water heating pipe. Make sure all accessories are complete.
2. Connect one end of the water heating pipe to the host computer, and the other end to the radiator or other equipment that needs heating. Make sure the connection is firm, and pay attention to the sealing performance of the interface.
3. Turn on the power and turn on the power switch. After confirming that the power supply is normal, you can see that the host starts to work.
4. Use the thermostat to adjust the appropriate temperature setting. Choose the appropriate temperature value according to personal needs and environmental conditions.
5. If necessary, do not fill the system with impurities or antifreeze after adding proper amount of cleaning, purification and filtration (if it is in a cold area).
6. Wait for a period of time for the equipment to warm up and run. When the set target temperature is reached, most models will automatically stop heating to save energy.
7. During use, please always pay attention to the system status and observe whether there are abnormal phenomena or faults. When the host computer is no longer needed, you can turn off the power switch and cut off the power supply.