How to unplug BYD e5 seat belt power plug?

The position of the card on the charging gun is where our thumb presses when we insert the charging gun. There is a small iron bar inside the gap directly below this switch. Just find something that can be plugged in, and then try to press the switch to take out the charging gun. Try to avoid bumping and vibration of the charger. In order to reduce the cost, the current chargers are basically not designed with high vibration resistance. After many chargers are vibrated, the potentiometer inside them will drift, which will lead to the whole parameter drift and lead to abnormal charging. Therefore, it is suggested that if the charger must be moved, it should be packed in plastic foam as far as possible. In addition, the charger should be ventilated when charging, otherwise it will not only affect the life of the charger, but also affect the charging state due to thermal drift. This will damage the battery. Electric vehicles are different from traditional gasoline vehicles. Have their own unique taste in the parking state of the car. If you let it starve for too long, it will resist. The principle is as follows: when the electric vehicle stops under the condition of insufficient power, the battery is easy to sulfate and block the ion channel, resulting in insufficient charging and decreased battery capacity. Therefore, when the electric vehicle is idle, it should keep its power supply active.