With the improvement of living standards, many families choose lock flooring to decorate the floor. So, how should we choose lock flooring? And how to maintain it when using it? Let’s take a look with the editor below.
Rendering of lock floor
1. What is lock floor?
Lock flooring, also known as Yuanyang buckle, is a patented technology of Shandong Dingyuxuan Flooring. The buckle type is closely combined and completely overcomes the seams and seams that occur when the floor is subject to changes in cold, heat, dryness and humidity from the outside. In order to solve problems such as warping and bulging, during the paving process, nails, glue, and keels are completely eliminated. It is laid directly on the ground, saving the height of the room, and can be disassembled and reused repeatedly. It is economical and practical, and saves pavement per square meter compared to conventional floors. The installation cost is about 20 yuan.
2. Tips for purchasing lock floors:
1. Types of lock floors
The laminate flooring sold on the market can be divided into lock floors. Single lock, triple lock and quad lock floors. The locking floor feature prevents floor seams from cracking.
2. Pay attention to the scale of the lock floor manufacturer
Lock flooring has higher requirements for production equipment, processing technology, base material performance, etc. Small factories generally cannot produce it. of. Therefore, you should be more careful when purchasing and be careful not to be deceived by fake manufacturers.
Rendering of lock floor
3. Cleaning and maintenance of lock floor:
1. Glue
Lock floor When installing, first pay attention to the glue. The main purpose of doing this is to prevent moisture. If glue is used during installation, the joints can be sealed, which plays a preventive role and adds a layer of insurance. At the same time, the lock design deliberately leaves a glue cavity in the floor for glue to flow and solidify, which can accurately lock the floor in the designed position, reducing the possibility of joints becoming larger and edges warping, and improving the beauty and service life of the floor. .
2. Avoid moisture
When maintaining the floor, you must wipe it with a wet mop or rag. The surface of the board is fine, but the joints between the boards are. It is easy for water to enter. Of course, it does not matter if moisture enters several times, but our floors will be used for many years. Multiple moisture intrusions will definitely affect the service life of the floor and cause losses to consumers.
Lock floor renderings
3. Precautions in the construction process
First start from the corner. Place the tongue side of the board against the wall, leaving a 10mm gap between the wall and the short side of the board. Then align the next board with the short side of the first board at an angle. Place the board flat on the ground while pressing it forward firmly.
Okay, the above is the relevant introduction on how to choose and maintain lock flooring. Have you mastered all these contents? If you want to know more decoration information, please continue to pay attention.