1. Open the feed cover and the winding guide on the feed belt.
2. Place the material reel on the feed reel frame.
3. When the upper winding belt and the transmission belt of the material pass through the material belt guide groove and the main frame, the upper cover belt is exposed from the first end of the material belt until the material is sucked out, and the transmission belt is placed in the groove of the guide rail.
4. After the sprocket catches the moving groove of the conveyor belt, pull down the material belt guide rail. When the material belt guide rail is in flat contact with the conveyor belt, finally adjust and confirm whether the conveyor belt is normal in the inclusion sprocket.
5. Place the fixed and separated upper cover belt flat between the gear and the forming gear for removal.
6. Use the rotary arm to push the tape to the pick-up point.