expand on
For more than ten years, the composite membrane treated by Ferrari (PVDF) has been used in important textile construction projects all over the world. Now, the second generation of membrane materials has once again confirmed the latest development of this outstanding material performance. Ferrari developed the second generation of materials to meet the requirements of architects and owners for fabric architecture at the beginning of the new century. This brand-new membrane material benefits from the latest scientific research technology, that is, the perfect combination of PVDF and hardening medium. This special combination obviously improves the mechanical strength and service life of materials, and can maintain the original aesthetic feeling of fabric buildings for a long time. The second generation of membrane materials can provide professional support on the basis of accumulated experience of 10 years. Ferrari can now provide 12 quality assurance according to the requirements and specific conditions of each project (except PRECONTRAINT702).
Surface strength
This test method comes from the field of industrial coatings and paints, and can prove the strength of material surface treatment under external mechanical damage. After being scratched on the surface of the material, the new material FLUOTOPT2 did not peel off even after accelerated aging (soaking in water at 50℃ 1000 hours).
Ferrari successfully transformed the technology of spraying PVDF coating on "hard" materials into flexible materials perfectly. The combination of PVDF and hardening medium ensures the best "grafting" of fluorinated polymer treatment and vinyl coating surface.
The surface treatment of FLUOTOPT2 becomes a real barrier against dust pollution and aging, while ensuring the best light transmittance of the material.
Anti-dust pollution
The affinity of fluorine and nitrogen gives PVDF remarkable anti-ultraviolet and anti-air pollution properties. It can be clearly seen that after 10 years, buildings using pretreated fluorine coatings show much higher anti-pollution ability than conventional surface dust-proof coatings.
endurance
After the 10 year test independently completed by ELF ATOCHEM group, the fluorinated polymer retains 80% of its original brightness, while the best surface of other coatings only retains 20%. The brightness level test was conducted at 60 degrees using a brightness tester.
change colour
After 10 years, the surface coating of PVDF only changed by 2.5 NBS units, while the best of other coatings also changed by 5 NBS units.
Light transmission quality
The quality of natural lighting is one of the decisive factors in choosing fabrics. FLUOTOPT2 provides more natural light, thus improving the best indoor comfort.
Ferrari Pre-Restrained Prestressing Patent
Controlling the tension of the membrane material core
Ferrari precompression Ferrari prestress is a global patented process, which aims to pre-tension cloth before and during coating. Different from conventional fabrics, Ferrari prestressed membrane is subjected to uniform and balanced stress in both warp and weft directions, thus ensuring almost the same elongation characteristics in both directions and the minimum creep of the material after a long time. . The combination of strict control of straight fibers and low crimp produces excellent dimensional stability. This unique advantage is of great significance to the tension of membrane materials in the structure. With the same weight and strength per square meter, the fiber surface coating thickness of Ferrari Precontraint prestressed fabric is much thicker than any conventional coating material.
Forward planning
long life
The durability of the mechanical properties of the composite coated fabric directly depends on the coating thickness at the top of the fiber, and this "useful" protective coating greatly prolongs the service life of the FluotopT2 film.
consistency
Large-scale fabric construction projects, or industrial standardized structure projects, are realized through repeated modular units or single films. Therefore, the compensation calculation and cutting diagram calculated according to a series of numerical values must be applicable to all batches of membrane materials used. Ferrari's prestress technology ensures this consistency. Finite creep
Pre-constrained prestress technology is controlled in the weft direction, which obviously limits the creep in the weft direction, which is 3 to 4 times lower than that of conventional membrane materials. Therefore, the membrane material with prestress technology can control and maintain its original shape for a long time.
Two-axis control
The original "elastic" system of rope tension gradually gave way to the precise scheme of using fixed connection and fixed boundary, and the fabric was not allowed to be re-tensioned.
The shape of long-span projects tends to be flat. Therefore, higher dimensional accuracy is required:
Pre-stressed membrane M2 series
Relying on Ferrari's unique patented prestress technology, the prestressed M2 series building membrane has the remarkable advantages of lasting and stable size, weather resistance and long service life. Pre-stressed M2 series membrane materials are rich in colors, providing various combinations and multifunctional functions: light structure, exhibition, important conference and reception center, storage structure, movable structure, awning and entrance awning. ...
Fluorine coating for fabric building
1, permanent membrane series
The surface treatment of fluororubber film ensures the durability of fabric structure. Surface phenomenon 100%PVDF coating has achieved outstanding results in resisting air pollution, dirt and bad weather. FLUOTOP T surface treatment is Ferrari's exclusive process and grafted into the coating to ensure that this composite material is complete, uniform and constant. Pre-stressed FLUOTOP T composite membrane ensures that fabric buildings have extremely reliable physical and mechanical properties, the most ideal translucent state and excellent aesthetic appearance.
2, sunshade series SOLTIS
Satin decoration: Satin decorative fabric is a real thermal light barrier. Its micro-ventilation structure can adjust the thermal effect of sunlight and effectively prevent glare. Shadi decorative fabrics have 46 colors, which can provide multiple colors and multiple uses for all buildings, whether in public places or private houses. Ferrari's patented prestressed manufacturing technology has brought unique characteristics such as constant size, no deformation, no need for reinforcement, natural tear resistance, durability and dust resistance, and small floor space, and also demonstrated the unparalleled advantages of tulle decorative fabrics for building technology shading.
Batilin: Batilin membrane is a kind of breathable fabric with high strength, corrosion resistance and easy maintenance. Completely free from the influence of humid and chlorine-containing environment erosion, antibacterial and temperature change. There is no need for large-area tension of heavy-duty supporting structures. Through a variety of combinations of light, materials and shapes, it adds a modern aesthetic feeling of form and color to the ceiling, partition and sound-absorbing wall. The ceiling made by Batiling MI series has fire-proof performance and has been officially recognized by Tenzin Zenith National Association of France.