1, put vinegar. Decorating vinegar with plates and putting it in the wardrobe can not only remove the odor of the wardrobe, but also sterilize it.
2, put salt water. Take a proper amount of salt and add water according to a certain proportion to make brine. Light salt water has great solubility in formaldehyde, which can obviously reduce the formaldehyde content in the wardrobe and effectively reduce the formaldehyde concentration.
Step 3 put soap. Put the soap (either soap or transparent soap) in the cupboard, put it in the box, and open the seal on one side. Soap has the function of moisture absorption, which can not only retain fragrance, but also prevent mildew, insects and moths.
4. Tea and water. Formaldehyde is soluble in water, and black tea and green tea can adsorb formaldehyde well. We can put a few pots of strong tea water in the corner of the wardrobe, which can speed up the emission of formaldehyde.
5. Keep ventilation. This is the most basic and simple method, suitable for everyone. As long as the cupboard door is opened to let the air circulate, the flowing air will discharge the odor out of the window, thus reducing the harmful gas formaldehyde.
Maintenance of wardrobe:
1. When there is dust on the surface of the cabinet, a wool duster or a soft cloth should be used for dust removal. If there is dirt on the surface, it should be polished and removed with sand wax. Wipe the hardware with a dry soft cloth. Do not use chemical cleaners or acidic liquids for cleaning. If there are black spots on the surface that are difficult to remove, wipe them with a little kerosene. Secondly, try to avoid damaging or scratching the surface of the wardrobe. If there are slight scratches and bumps on the surface, you can wipe it with a cloth dipped in a mixture of soot and lemon juice, dry it and then wax it.
2. Check the connector regularly, tighten it in time if it is loose, and inject a small amount of lubricating oil. When cleaning, you can wipe the cabinets and doors with a semi-wet rag, and do not use corrosive cleaning agents. Dust on the track can be cleaned with a vacuum cleaner or a small brush, and metal parts such as cabinets and pull rods can be wiped with dry cloth.