First, the brand introduction of carbon fiber electric floor heating
1, Kellogg Company of the United States is one of the pioneers in the global flexible heating technology industry, and is committed to designing, producing and selling world-class heating systems. It is also one of the earliest enterprises to obtain patent certification and produce electric floor heating.
2. South Korea Yuedong Co., Ltd. is a group company that has made outstanding achievements in the fields of nuclear power measurement and control system, liquid nano-carbon manufacturing (materials needed for carbon fiber far-infrared electric heating film), quantum nano-battery, polymer materials and so on. As the weather vane of the floor heating industry in Southeast Asia, it has been leading the continuous innovation and development of the floor heating industry for more than 30 years.
Suzhou Nuanbeni Carbon Fiber Technology Co., Ltd. is a state-owned enterprise specializing in the production of carbon fiber electric floor heating. Warm Beni carbon fiber floor heating adopts top-grade carbon fiber material, which has higher thermal performance and stability, and the electric heating energy conversion rate can reach over 99%. High-tech products have won many national product patents and independent intellectual property rights, and are the best in the carbon fiber floor heating industry.
4. Hebei Warm Geer Electric Appliance Co., Ltd. was established in 2008. Is a comprehensive entity enterprise integrating production, sales and service. It is the earliest and most powerful manufacturer with independent intellectual property rights in China. Specializing in the production of carbon fiber electric heaters, carbon fiber heaters, carbon crystal wall-hung boilers, carbon fiber floor heating, water heating and electric blankets and other high-tech electronic and electrical products, with first-class skilled technical team and broad sales network, the products sell well all over the country.
Second, the installation method of carbon fiber electric floor heating
1, clean up the construction site and lay reflective film. Laying heat insulation board. The joint height is not more than 5mm, the gap is not more than 10cm, and it shall be pasted with transparent tape. The periphery should be paved, and the padding should be placed in the middle as far as possible.
2. To install the thermostat, first check whether the power supply is turned off. If not, turn off the power first. Then according to the instructions, install the thermostat in the thermostat box that has been installed in the wall before and fix it with bolts.
3. Check the power supply circuit to see if the operation data is normal. Compared with the water heating system, the installation process of carbon fiber floor heating is not so complicated, but in terms of heating comfort, the water heating system is better.
Three, carbon fiber floor heating installation matters needing attention
The installation of carbon fiber floor heating requires the use of wires, so it is necessary to install live wires, neutral wires and ground wires to ensure safety. For the requirements of the ground, it must be flat, especially for pipes buried after grooving, and it must not be convex. This requires professional staff to level, and ordinary users can't do this themselves. If laid in the bathroom, you need to pay attention to the waterproof layer, and the wall height should be higher than 1.8 meters. If there is a floor on it, it should be noted that you can't use a moisture-proof pad, because the moisture-proof pad is heat-insulating, which will affect the thermal conductivity and increase energy consumption, which needs attention.
As we all know, the air is very bad in winter due to heating, so carbon fiber electric floor heating is also a good heating method. I hope that friends will first consider carbon fiber electric floor heating when installing floor heating.