1. YCN (040G/065G) JD type
YCN040GJD/YCN065GJD type separated garbage compression transfer station equipment consists of a self-propelled garbage compressor (including hydraulic station, electronic control system, It consists of a bucket mechanism) a garbage bin bottom frame, a car guide limiter and an NZ5150ZXX type garbage truck with a removable compartment. It has the functions of crushing, compressing and compacting garbage.
2. YCN (040G/065G) XD type
This equipment consists of a garbage compressor, a removable garbage truck (a pull-arm garbage truck) and a mobile platform. . The garbage compactor can collect, crush, and compress garbage into a garbage bin. The garbage truck is moved by a mobile platform to a parking space, and then pulled by a pulling arm to a special car chassis, and then transported to the landfill.
Realize the use of multiple boxes in one machine (garbage compressor) and multiple boxes in one vehicle, minimizing the number of garbage compressors and car chassis to achieve the transfer of larger amounts of garbage. The equipment has high shipping efficiency, no secondary pollution, no loss of load, and is suitable for use by the environmental sanitation department.
3. YCN (040G/065G) type
YCN040G/YCN065G type separated garbage compression transfer station equipment, consisting of a fixed compressor, a lifting tower and a removable garbage truck The garbage compactor is suitable for being installed close to the street and has the function of crushing and compressing garbage.
After the garbage is compressed by the fixed compressor and put into the garbage container, it is directly transported by the chassis truck to the landfill for processing, which avoids secondary pollution of the garbage in transit, improves the garbage collection rate, and can receive Good social and economic benefits.
4. YCN (040/065) YS type
The main vehicle used by the YCN040YS/YCN065YS garbage compression transfer station equipment is a compression garbage truck with its own compression system. Suitable for installation near streets and residential areas. This garbage compression equipment has the function of crushing and compressing garbage. After the garbage is compressed and put into the garbage container, it is directly transported by the chassis truck to the landfill for disposal.
Extended information
The promotion and use of garbage transfer stations not only beautifies the environment, but also eliminates secondary pollution, reduces the breeding of mosquitoes and flies, improves vehicle efficiency, and reduces The labor intensity of workers is greatly reduced, and operating costs are greatly reduced.
A hydraulic lifting system is installed at the bottom of the entire compression box. There is a compression propulsion cylinder at the rear of the compression box, as well as a hydraulic system for opening and closing the filling port and a hydraulic system for opening and closing the front discharge port curtain door. When the top of the compression box drops to be parallel to the ground, it will automatically stop. The top of the compression box is equipped with an automatically opening and closing garbage filling door cover. The door cover will be parallel to the ground after opening 110 degrees and closing.
When the garbage accumulates close to the filling port, start the compression cylinder button "push button" to compress the garbage. When the garbage is compressed to a volume of 4m3 in the container room, the compression cylinder will perform reciprocating compression 3 to 4 times. Finally, the garbage will be maintained and compressed for 1 to 2 minutes to squeeze out the water, and then return the compression cylinder to wait for subsequent transfer. .
Baidu Encyclopedia-Waste Transfer Station
Baidu Encyclopedia-Waste Transfer Station