First, the brand introduction of tile glue
1, BASF tile adhesive (from Germany, supplier of automotive coatings/general industrial coatings, one of the top ten tile adhesive brands, known as world-renowned chemical company, BASF (China) Co., Ltd.) BASF tile adhesive in Germany is a polymer. The cement-based tile adhesive modified by this material has excellent structural performance, and the bonding performance is greatly improved compared with the traditional cement mortar. It can be used for concrete, plastering, common tiles, ceramic mosaics and small natural stones, and the water absorption on the surface of brick walls is above 6%.
2. Aoneng High Tile Glue (1990 in Australia, specializing in the production of large-scale transnational dry powder mortar and polymer additives, influencing brands, top ten brands of tile glue, Aoneng High Tile Glue (China) Co., Ltd.) is a new type of high-strength tile glue, which is suitable for all kinds of tiles to be stuck on grass roots, stone slabs and materials with strong adhesion. There is no need to soak the brick wall during construction, which can obviously improve the work efficiency and is convenient and fast; It is safer than the traditional cement slurry method. It can also reduce the weight of construction waste and walls; It has good impermeability and aging resistance; It can be directly used for the level rough base or the smooth concrete floor.
3. Yuchuan tile adhesive (Asian dry mortar manufacturer, several national patents, common mortar influencing brands, top ten brands of ceramic tile adhesives, Tianjin Yuchuan dry mortar Co., Ltd.) Yuchuan tile adhesive adopts polymer formula to modify flexible water emulsion, which has strong adhesion and can penetrate the adhesive in two directions to make it firmly combined for a long time; Good air permeability and high flexibility, suitable for various temperatures and humidity.
Second, the use of tile glue
Application and surface treatment of tile adhesive 1
All surfaces shall be firm, dry, clean, free from shaking, oil, wax stains and other loose objects;
The painted surface should be rough to expose at least 75% of the original surface;
After the new concrete surface is completed, it is necessary to keep the brick masonry for six weeks before laying bricks. Before bricklaying, the new gypsum surface should be cured for at least 7 days;
Old concrete and plastered surfaces can be cleaned with detergent and then washed with water. Dry the surface to build bricks;
The base material is loose, has strong water absorption or the surface dust and dirt are difficult to clean. You can apply rabbit oil first to help the tiles stick together.
How to use tile glue 2. Stirring and mixing
Put TT powder into water and stir it into paste. Pay attention to the water before discharging powder. Manual or electric agitator can be used for mixing;
Mixing 25 kg of powder and about 6-6.5 kg of water; If necessary, the company can use rebound ceramic tile additives instead of clean water, with the proportion of 25 kg of powder and 6.5-7.5 kg of additives; Mixing is enough, no powder is needed. After stirring, it must stand for about 10 minute, and then stir for a while;
According to the weather, the glue should be used up in about 2 hours (the glue surface should be removed). Do not add water to the dry glue before use.
How to use tile glue 3. building technology
Apply the glue to the working surface with a toothed scraper to make it evenly distributed and form a rack (adjust the angle between the scraper and the working surface to control the thickness of the glue). Each floor is about 1 m2 (depending on the weather temperature, the required temperature range is 5 to 40℃), and then the tiles are pressed into the interior within 5 to 15 minutes (adjustment takes 20 to 25 minutes). Considering the flatness of the working face and the convexity and concavity of the back of the ceramic tile, the size of the toothed scraper should be considered.
If the groove on the back of the tile is deep or the stone is large and heavy, it should be painted on both sides. Coating glue on the working surface and back of the ceramic tile; Pay attention to retaining expansion joints; After the brick is completed, the glue must be completely dried (about 24 hours) before the next step can be carried out; Clean the tile surface (and tools) with a damp cloth or sponge. If it is cured for more than 24 hours, you can use tile cleaner to clean the stains on the surface of the tile (do not use acidic cleaner).
The above is the introduction of the use of tile glue we brought to you. Thank you for reading.