If you want to operate the lights, you need to ensure that the vehicle is in the ignition state. The steering signal is controlled by the light pole on the left side of the steering wheel, and the low beam lights, width indicator lights and other lights are controlled by the light knob on the driver's side of the center console.
1. Turn signal
① Usage of left turn signal: Turn down the light pole and turn on the left turn signal.
② Use of right turn signal: Just lift the control lever to turn on the right turn signal.
Turn the steering switch slightly, and the corresponding turn signal flashes three times.
2. High beam and instantaneous opening function of high beam
③ Turn on the high beam: Turn the light control knob on the driver's left to turn on the low beam, and then push the light control lever forward to turn on the high beam.
④ Instantaneous turn-on function of high beam: After turning on the headlights, it is a good warning means to pull back the pole once to activate the alternation of high beam and low beam. In the instrument cluster, you can see that the high beam symbol light is on.
⑤ Automatic high beam (equipped on some models): The button in the center of the light control lever is the function of automatic high beam, and the vehicle will automatically turn on the high beam without the driver's operation.
The fog lights are on.
The fog light on button is located next to the light control knob, which can be turned on by pressing the button.
4, automatic headlights, low beam lights, width indicator lights.
Turn the light knob to the automatic position and turn on the automatic headlight. Turn the light control button in turn, and turn on the width indicator, automatic headlight and low beam in turn.
5. Headlight cleaning
When the high beam is turned on, pulling the wiper inward can start the headlight cleaning function. Turning on the glass water switch will only clean the glass when the headlights are turned off.
Million car purchase subsidy