Steps for customizing wardrobes:
1. Stakeout: Each wardrobe product must be laid out by a sitter before production, but staking is generally only used to make special-shaped wardrobe structures. superior.
2. Material selection: Generally speaking, wardrobe factories select materials according to the following standards:
①The wood material has beautiful texture, moderate weight, and strength. Be good;
② Pay attention to the quality of the wood and eliminate defects such as dead knots, bursts, blackening, mold and tree core wires to reflect good wood standards.
The next step is to arrange the cutting. Each product is cut according to the size and proportion on the drawing. The cut products are first taken to the woodworking workshop to start production.
3. Woodworking: Woodworking is actually a process in which each component of the product is processed from raw parts into the shape and size required by the drawing.
4. Paint: The painting step is crucial to the effect of the wardrobe. The smoothness and brightness of its surface determine the beauty of the wardrobe. Good wardrobe brands and environmentally friendly products have strict requirements on the use of paint.
5. Tapping: For sofas, chairs or other products that require tapping, you need to start tapping after painting.
6. Installation and packaging.
Extended information:
Notes on custom wardrobes:
1. Top and bottom rails: When purchasing sliding doors for custom wardrobes, try to choose materials and a door The top and bottom rails are made of the same material, so it is considered that the top and bottom rails are load-bearing parts. To withstand repeated friction, the top and bottom rails of customized wardrobes must have high strength and wear resistance. The top and bottom rails are made of aluminum-magnesium-titanium-silicon alloy, which has higher strength and strong resistance to deformation, and can extend the service life of customized wardrobes.
2. Rubber strips: The main popular materials on the market include PVC rubber, silicone, etc. The silicone strips are made of non-toxic and non-corrosive silicone material. It can maintain good toughness even at ultra-low temperatures, ensuring the flexible connection of plates and profiles.
3. Glue, edge banding, and veneer: Edge banding mainly seals the section of the board. Customized wardrobes are protected from damage to the boards by the environment or adverse factors (mainly moisture) during use. Customized wardrobes also achieve decorative effect. Ordinary glue has a pungent smell because it contains formaldehyde, and it may also cause cancer. So when purchasing, pay attention to whether the cabinet has any peculiar smell.
4. Profiles: There are generally two types of practical profile base materials for sliding doors: one is aluminum alloy and the other is plastic steel. Customized wardrobes are made of aluminum alloy, which is a high-end material for sliding door base materials due to its light weight and high strength. It has gradually replaced plastic steel products. Customized wardrobes The aluminum alloy itself is divided into ordinary aluminum-magnesium alloy and smaller special aviation aluminum-magnesium alloy.
Customized wardrobes have higher strength and smaller weight due to the aluminum-magnesium-titanium-silicon alloy. Therefore, it is favored by consumers, but the cost is several times that of ordinary aluminum-magnesium alloy. When looking at profiles, you should not only pay attention to the base material, but also observe its surface treatment. Advanced surface treatments include anodizing, electrophoretic carbon spraying and other processes. These processes have higher hardness and aesthetics than simple spraying and electroplating.
The electrophoretic coating used by KD in the United States for customized wardrobes has a film thickness of 20 microns, and its adhesion reaches level 0, the highest international standard, with unparalleled scratch resistance.
5. Top and bottom wheels: The top and bottom wheels of customized wardrobes are important accessories for sliding doors. Pay attention to the selection of high-quality bearing pulleys. The exterior of the custom wardrobe bottom wheel is made of fiberglass material, which has the characteristics of high strength, wear resistance, and low noise. Used to push and pull more than 100,000 times, the custom wardrobe wheel body is treated with three-degree polishing and electroplating, which will never rust.
6. Boards and base materials: Commonly used shepherd’s purses in cabinet boards include blockboard, density board, and moisture-proof particle board. The most cost-effective among customized wardrobes is moisture-proof particleboard. It has the advantages of light weight, high strength, and strong nail-holding ability. However, moisture-proof particleboard also has different qualities.